2008 Audi All Road Avant

Engine undertrays insecure

Rear Prop shaft securing bolt missing (6.1.7 (a) (i))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Engine undertrays insecure

Automatic Trans sump pan corroded

Central Exhaust mounting defective Exhaust sleeve fractured (6.1.2 (a))

Nearside Front Brake pipe corroded, covered in grease or other material Brake pipe on calliper (1.1.11 (c))

Nearside Rear Shock absorbers has slight external damage to the casing Casing corroded (5.3.2 (b))

Offside Front Brake pipe corroded, covered in grease or other material Brake pipe on calliper (1.1.11 (c))

Offside Rear Shock absorbers has slight external damage to the casing Casing corroded (5.3.2 (b))

Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Nearside Rear Shock absorbers has slight external damage to the casing Corroded (5.3.2 (b))

Nearside Rear Upper Suspension arm corroded but not seriously weakened Corroded (5.3.3 (b) (i))

Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Front Upper Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Shock absorbers has slight external damage to the casing Corroded (5.3.2 (b))

Offside Rear Upper Suspension arm corroded but not seriously weakened Corroded (5.3.3 (b) (i))

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Front Service brake fluctuating, but not excessively (1.2.1 (e))

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Shock absorbers has slight external damage to the casing Corroded (5.3.2 (b))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Upper Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Shock absorbers has slight external damage to the casing Corroded (5.3.2 (b))

Rear axle corroded but not holed

Sub-frame corroded but not seriously weakened both (5.3.3 (b) (i))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Offside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Service brake efficiency below requirements (1.2.2 (a) (i))

Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Front Anti-roll bar ball joint dust cover severely deteriorated both (5.3.4 (b) (i))

Sub-frame corroded but not seriously weakened both (5.3.3 (b) (i))

Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement nearside and offside (5.3.4 (a) (i))

Offside Front Upper Suspension arm pin or bush worn but not resulting in excessive movement rear arm inner bush starting to brake away (5.3.4 (a) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Central Rear Stop lamp not working (1.2.1b)

Rear Registration plate lamp not working nearside and offside (1.1.C.1d)

Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)