MOT Status
ExpiredMileage
95,199 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Offside Front Coil spring fractured or broken (5.3.1 (b) (i))
Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive Floor (5.3.6 (a) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Outer Seat belt anchorage prescribed area is corroded but not considered excessive sill (7.1.1 (a) (i))
Nearside Rear Brake hose slightly deteriorated (1.1.12 (b) (ii))
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Front Road wheel slightly distorted (5.2.2 (c) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive Floor (5.3.6 (a) (i))
Offside Outer Seat belt anchorage prescribed area is corroded but not considered excessive sill (7.1.1 (a) (i))
Offside Rear Brake hose slightly deteriorated (1.1.12 (b) (ii))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Oil leak, but not excessive engine (8.4.1 (a) (i))
Oil leak, but not excessive transmission (8.4.1 (a) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement Front bush (5.3.4 (a) (i))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive floor (5.3.6 (a) (i))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive outer sill (5.3.6 (a) (i))
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement Front bush (5.3.4 (a) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive floor (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive outer sill (5.3.6 (a) (i))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement Front bush (5.3.4 (a) (i))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive floor (5.3.6 (a) (i))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive outer sill (5.3.6 (a) (i))
Nearside Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a))
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement Front bush (5.3.4 (a) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive floor (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive outer sill (5.3.6 (a) (i))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Oil leak, but not excessive (8.4.1 (a) (i))
Windscreen washer provides insufficient washer liquid (3.5 (a))
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (2.4.A.3)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (2.4.A.3)
floor pan corroded, both sides front
lambda sensor wiring insecure
oil leak/s
Nearside Rear Registration plate lamp not working 501 bulb (1.1.C.1d)
Offside Front Headlamp not working on dipped beam (1.7.5a)
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (2.4.A.3)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (2.4.A.3)
floor pan corroded, both sides front
lambda sensor wiring insecure
oil leak/s
Nearside Front tyre worn on outer edge
area around fuel cap heavily corroded
Offside Rear Suspension component mounting prescribed area is excessively corroded outer sill (2.4.A.3)
Nearside Front tyre worn on outer edge
area around fuel cap heavily corroded
Nearside Front Body has slight corrosion (6.1.B.2)
Offside Front Body has slight corrosion (6.1.B.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Body has slight corrosion (6.1.B.2)
Offside Front Body has slight corrosion (6.1.B.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Headlamp aim too high (1.8)
Offside Headlamp not working on dipped beam (1.7.5a)
Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)
Offside Headlamp aim too low (1.8)
Nearside Front Anti-roll bar has excessive play in a ball joint (2.4.G.2)
Nearside Front Tyre has ply or cords exposed (4.1.D.1b)
Offside Front Anti-roll bar has excessive play in a ball joint (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Front Tyre has ply or cords exposed (4.1.D.1b)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Rear Registration plate lamp not working (1.1.C.1d)
Rear brake imbalance 41%
o/s/f tyre tread bald inner edge
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
KL05 ZPE is a 2005 Ford Ka in Blue with a 1,299cc petrol engine. This vehicle has been through 20 MOT tests with a personal pass rate of 60%.
Across all 2005 Ford Ka models, the average MOT pass rate is 68.2% with a typical mileage of 43,813 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying KL05 ZPE, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 21 years old, this Ford Ka is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of KL05 ZPE?
You can check the full history of KL05 ZPE by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was KL05 ZPE registered?
KL05 ZPE is a 2005 Ford Ka, first registered on 8 March 2005.
Is KL05 ZPE safe to buy?
The MOT history for KL05 ZPE shows 20 tests with a 60% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does KL05 ZPE have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on KL05 ZPE. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.