MOT Status
ExpiredMileage
147,280 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Central Exhaust has a minor leak of exhaust gases hole in pipe near joint (requires attention) (6.1.2 (a))
Front Brake hose has slight corrosion to ferrule NS and OS (1.1.12 (f) (i))
Front Sub-frame corroded but not seriously weakened and suspension components and arms (5.3.3 (b) (i))
Nearside Front Lower Shock absorbers has a slightly worn bush (5.3.2 (c))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement bushes perishing (5.3.4 (a) (i))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive jacking point between sill and inner cross member (5.3.6 (a) (i))
Nearside Headlamp has a product on the lens but not seriously reducing light output requires attention (4.1.4 (b))
Nearside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Shock absorbers has light misting of oil (5.3.2 (b))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement bushes perishing x2 (5.3.4 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill /susp mount area (5.3.6 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement bushes perishing (5.3.4 (a) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive jacking point between sill and inner cross member (5.3.6 (a) (i))
Offside Headlamp has a product on the lens but not seriously reducing light output requires attention (4.1.4 (b))
Offside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement bushes perishing x2 (5.3.4 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill /susp mount area (5.3.6 (a) (i))
Oil leak, but not excessive requires attention (8.4.1 (a) (i))
Rear Brake hose has slight corrosion to ferrule NS and OS (1.1.12 (f) (i))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Rear Sub-frame corroded but not seriously weakened and suspension components and arms (5.3.3 (b) (i))
exhaust system corroded
full engine covers and undertrays/shields fitted obscuring viewing some testable components.
trim adrift under front bumper
under-body corrosion and sill covers fitted
Central Rear Stop lamp(s) not working (4.3.1 (a) (ii))
Engine MIL inoperative or indicates a malfunction and dpf light (8.2.2.2 (g))
Central Exhaust has a minor leak of exhaust gases hole in pipe near joint (requires attention) (6.1.2 (a))
Front Brake hose has slight corrosion to ferrule NS and OS (1.1.12 (f) (i))
Front Sub-frame corroded but not seriously weakened and suspension components and arms (5.3.3 (b) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement bushes perishing (5.3.4 (a) (i))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive jacking point between sill and inner cross member (5.3.6 (a) (i))
Nearside Headlamp has a product on the lens but not seriously reducing light output requires attention (4.1.4 (b))
Nearside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Shock absorbers has light misting of oil (5.3.2 (b))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement bushes perishing x2 (5.3.4 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill /susp mount area (5.3.6 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement bushes perishing (5.3.4 (a) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive jacking point between sill and inner cross member (5.3.6 (a) (i))
Offside Headlamp has a product on the lens but not seriously reducing light output requires attention (4.1.4 (b))
Offside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement bushes perishing x2 (5.3.4 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill /susp mount area (5.3.6 (a) (i))
Oil leak, but not excessive requires attention (8.4.1 (a) (i))
Rear Brake hose has slight corrosion to ferrule NS and OS (1.1.12 (f) (i))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Rear Sub-frame corroded but not seriously weakened and suspension components and arms (5.3.3 (b) (i))
exhaust system corroded
full engine covers and undertrays/shields fitted obscuring viewing some testable components.
trim adrift under front bumper
under-body corrosion and sill covers fitted
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Front Brake hose has slight corrosion to ferrule both sides (1.1.12 (f) (i))
Nearside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Nearside Front Lower Shock absorbers has a slightly worn bush bush perishing (5.3.2 (c))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement bushes perishing (5.3.4 (a) (i))
Nearside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Shock absorbers has light misting of oil (5.3.2 (b))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement bushes perishing (5.3.4 (a) (i))
Offside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Offside Front Lower Shock absorbers has a slightly worn bush bush perishing (5.3.2 (c))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement bushes perishing (5.3.4 (a) (i))
Offside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement bushes perishing (5.3.4 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Brake hose has slight corrosion to ferrule both sides (1.1.12 (f) (i))
Suspension arm corroded but not seriously weakened front and rear heavily corroded (5.3.3 (b) (i))
exhaust system corroded
under-body corrosion and sill covers fitted
Engine MIL inoperative or indicates a malfunction (8.2.2.2 (g))
Offside Front Brake hose excessively damaged hose connection to body/shock obsorber adrift not clipped securley (1.1.12 (b) (ii))
Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Front Brake hose has slight corrosion to ferrule both sides (1.1.12 (f) (i))
Nearside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Nearside Front Lower Shock absorbers has a slightly worn bush bush perishing (5.3.2 (c))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement bushes perishing (5.3.4 (a) (i))
Nearside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Shock absorbers has light misting of oil (5.3.2 (b))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement bushes perishing (5.3.4 (a) (i))
Offside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Offside Front Lower Shock absorbers has a slightly worn bush bush perishing (5.3.2 (c))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement bushes perishing (5.3.4 (a) (i))
Offside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement bushes perishing (5.3.4 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Brake hose has slight corrosion to ferrule both sides (1.1.12 (f) (i))
Suspension arm corroded but not seriously weakened front and rear heavily corroded (5.3.3 (b) (i))
exhaust system corroded
under-body corrosion and sill covers fitted
Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Nearside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))
Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement offside and nearside (5.3.4 (a) (i))
Suspension component corroded but not seriously weakened front and rear (5.3.3 (b) (i))
under-body corrosion and sill covers fitted
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Oil leaking excessively from engine (8.4.1 (a) (i))
Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Nearside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))
Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement offside and nearside (5.3.4 (a) (i))
Suspension component corroded but not seriously weakened front and rear (5.3.3 (b) (i))
under-body corrosion and sill covers fitted
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Anti-roll bar linkage ball joint dust cover severely deteriorated both sides (5.3.4 (b) (i))
Rear suspension components corroded
under body corrosion
Nearside Front Tyre worn close to legal limit/worn on edge 2.00MM , legal limit 1.6MM also worn inner and outer edges. (5.2.3 (e))
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Front Suspension arm ball joint dust cover severely deteriorated rear arm. (5.3.4 (b) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear suspension components corroded.
under-body corrosion.
Front Oil leak ()
Offside Front Lower Front suspension ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
Rear Anti-roll bar ball joint dust cover deteriorated, but preventing the ingress of dirt drop links both sides (2.4.G.2)
suspension components corroded
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Front tyre has sidewall damage
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Suspension arm has excessive play in a pin/bush (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Rear Suspension arm has excessive play in a pin/bush (2.4.G.2)
Engine covers fitted obscuring some components in the engine bay
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Rear Brake pad(s) wearing thin (3.5.1g)
Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Under-trays fitted obscuring some underside components
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
all four tyres wearing on inner edges
How Reliable is the Mazda 6?
Based on 1,904,140 MOT tests across 159,651 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
KL07 MGX is a 2007 Mazda 6 in Grey with a 1,998cc diesel engine. This vehicle has been through 18 MOT tests with a personal pass rate of 77.8%.
Across all 2007 Mazda 6 models, the average MOT pass rate is 73.6% with a typical mileage of 75,411 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Mazda 6 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 45,082 recorded failures. If you're considering buying KL07 MGX, it's worth having these areas checked by a mechanic before committing.
The Mazda 6 typically stays on UK roads for around 24 years. At 19 years old, this Mazda 6 is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of KL07 MGX?
You can check the full history of KL07 MGX by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was KL07 MGX registered?
KL07 MGX is a 2007 Mazda 6, first registered on 31 March 2007.
Is KL07 MGX safe to buy?
The MOT history for KL07 MGX shows 18 tests with a 77.8% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does KL07 MGX have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on KL07 MGX. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.