2008 Honda Accord

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Heatshield insecure

Nearside Front Suspension arm ball joint dust cover severely deteriorated Upper (5.3.4 (b) (i))

Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened both (1.1.14 (a) (ii))

Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Service brake requirements only just met. It would appear that the braking system requires adjustment or repair (1.2.1 (c))

undertray rear insecure

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Electronic stability control warning lamp indicates a fault (7.12 (e))

Front Headlamp aim projected beam image is obviously incorrect both (4.1.2 (c))

Front Position lamp not working both (4.2.1 (a) (ii))

Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill holed (6.1.1 (c) (i))

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Heatshield insecure

Nearside Front Suspension arm ball joint dust cover severely deteriorated Upper (5.3.4 (b) (i))

Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened both (1.1.14 (a) (ii))

Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

undertray rear insecure

Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Nearside Rear Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

2 rear shock absorbers corroded

Nearside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Offside Rear Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Service brake binding but not excessively (1.2.1 (f))

Offside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))

Offside Parking brake inoperative on one side (1.4.1 (a))

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Offside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Service brake fluctuating, but not excessively (1.2.1 (e))

Offside Rear Service brake fluctuating, but not excessively (1.2.1 (e))

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Upper Suspension arm has slight play in a ball joint (2.4.G.2)

brake pedal rubber holed

n/s/r tyre tread has bald spots on edge