MOT Status
ExpiredMileage
112,502 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Rear Integral body structure is deformed but structural rigidity is not significantly reduced dent (6.1.1 (a) (i))
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))
Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))
Exhaust hydrocarbon content after 2nd fast idle exceeds default limits (8.2.1.2 (b))
Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))
Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))
Offside Front Position lamp not working (4.2.1 (a))
Offside Rear Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))
Nearside Rear Integral body structure is deformed but structural rigidity is not significantly reduced dent (6.1.1 (a) (i))
Nearside Rear Brake pad(s) wearing thin (3.5.1g)
Offside Rear Brake pad(s) wearing thin (3.5.1g)
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Nearside Rear Brake pad(s) wearing thin (3.5.1g)
Offside Front Lower Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
Offside Rear Brake pad(s) wearing thin (3.5.1g)
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Front Exhaust has a major leak of exhaust gases FROM CAT BOX (7.1.2)
Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Offside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Offside Front Front constant velocity joint is excessively worn (2.5.C.1b)
Offside Rear Brake pipe excessively corroded FRONT TO REAR AT REAR (3.6.B.2c)
Rear Exhaust has a major leak of exhaust gases ON THE ( Y )OF THE JOINT FOR THE BACK BOX (7.1.2)
Nearside Rear Brake pad(s) wearing thin (3.5.1g)
Offside Front Lower Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
Offside Rear Brake pad(s) wearing thin (3.5.1g)
Exhaust has a minor leak of exhaust gases centre box (7.1.2)
Seat belt anchorage prescribed area is excessively corroded NSF, OSF, NSR and OSR 4 Separate areas (5.2.6)
Nearside Front Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings SILL (6.1.B.2)
Nearside Rear Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings SILL (6.1.B.2)
Offside Front Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings SILL (6.1.B.2)
Offside Rear Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings SILL (6.1.B.2)
Nearside Body has slight corrosion (6.1.B.2)
Offside Body has slight corrosion (6.1.B.2)
Nearside Headlamp aim too high (1.8)
Offside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Headlamp aim too high (1.8)
Nearside Body has slight corrosion (6.1.B.2)
Offside Body has slight corrosion (6.1.B.2)
Offside Front Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)
Engine covers fitted obscuring some components in the engine bay
Under-trays fitted obscuring some underside components
Front Exhaust has a minor leak of exhaust gases (7.1.2)
Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Nearside Front Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
Nearside Rear Brake pad(s) wearing thin (3.5.1g)
Nearside Seat belt anchorage prescribed area is distorted but not considered excessive (5.2.6)
Offside Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)
both front wiper blades starting to split
Front Exhaust has a minor leak of exhaust gases (7.1.2)
Front Exhaust has a minor leak of exhaust gases (7.1.2)
Nearside Headlamp not working on dipped beam (1.7.5a)
How Reliable is the Mazda 6?
Based on 1,904,140 MOT tests across 159,651 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
KL55 LPA is a 2005 Mazda 6 in Grey with a 1,999cc petrol engine. This vehicle has been through 17 MOT tests with a personal pass rate of 58.8%.
Across all 2005 Mazda 6 models, the average MOT pass rate is 72.4% with a typical mileage of 77,324 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 6 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 45,082 recorded failures. If you're considering buying KL55 LPA, it's worth having these areas checked by a mechanic before committing.
The Mazda 6 typically stays on UK roads for around 24 years. At 21 years old, this Mazda 6 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of KL55 LPA?
You can check the full history of KL55 LPA by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was KL55 LPA registered?
KL55 LPA is a 2005 Mazda 6, first registered on 20 September 2005.
Is KL55 LPA safe to buy?
The MOT history for KL55 LPA shows 17 tests with a 58.8% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does KL55 LPA have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on KL55 LPA. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.