2005 Mazda 6

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Window excessively tinted but not adversely affecting driver's view (3.2 (b) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Window excessively tinted but not adversely affecting driver's view (3.2 (b) (i))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Windscreen excessively tinted but not adversely affecting driver's view upper edge of screen (3.2 (b) (i))

Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))

Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Rear Outer Tyre has a lump, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Window excessively tinted but not adversely affecting driver's view (3.2 (b) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Window excessively tinted but not adversely affecting driver's view (3.2 (b) (i))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Windscreen excessively tinted but not adversely affecting driver's view upper edge of screen (3.2 (b) (i))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Exhaust emits excessive dense blue smoke during acceleration (8.2.1.2 (g))

Exhaust hydrocarbon content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Front Brake pad(s) worn down to wear indicator (1.1.13 (a) (i))

Nearside Rear Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Nearside Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Offside Front Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill (6.1.1 (c) (i))

Offside Front Suspension arm ball joint excessively worn Rear arm (5.3.4 (a) (i))

Offside Headlamp not working on main beam (4.1.1 (a) (ii))

Offside Rear Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i))

Offside Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))

Offside Front Upper Suspension arm ball joint likely to become detached (5.3.4 (a) (ii)) DANGEROUS

Oil leak, but not excessive (8.4.1 (a) (i))

Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Rear Suspension arm pin or bush worn but not resulting in excessive movement both trailing arm (5.3.4 (a) (i))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Rear Inner Suspension component mounting prescribed area is inadequately repaired sill area (5.3.6 (a) (i))

Nearside Rear Seat belt anchorage prescribed area is inadequately repaired wheel arch area (7.1.1 (a) (i))

Nearside Rear Suspension component mounting prescribed area is inadequately repaired triangle between inner/outer sill area (5.3.6 (a) (i))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill area (5.3.6 (a) (i))

Offside Rear Outer Suspension component mounting prescribed area is inadequately repaired sill area (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is inadequately repaired triangle between inner/outer sill area (5.3.6 (a) (i))

Nearside Inner Suspension component mounting prescribed area is corroded but not considered excessive and outer sills area (5.3.6 (a) (i))

Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive and outer sill areas (5.3.6 (a) (i))

Rear Suspension arm pin or bush worn but not resulting in excessive movement both trailing arm (5.3.4 (a) (i))

Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill area (5.3.6 (a) (i))

Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced wheel arch area (7.1.1 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength triangle between outer sill and inner sills (5.3.6 (a) (i))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill area (5.3.6 (a) (i))

Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill area (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength triangle between outer and inner sills (5.3.6 (a) (i))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Nearside Inner Suspension component mounting prescribed area is corroded but not considered excessive and outer sills (5.3.6 (a) (i))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm bush (5.3.4 (a) (i))

Offside Inner Suspension component mounting prescribed area is corroded but not considered excessive and outer sills (5.3.6 (a) (i))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm bush (5.3.4 (a) (i))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm front bush (5.3.4 (a) (i))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm front bush (5.3.4 (a) (i))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear suspension components corroded

Offside Rear Nail in tyre ()

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

Nearside Front Front position lamp(s) not working (1.1.A.3b)

Nearside Rear Outer Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)

Offside Rear Inner Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)

Offside Rear Outer Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)

Parking brake lever has no reserve travel (3.1.6b)

Parking brake: efficiency below requirements (3.7.B.7)

Offside Rear Nail in tyre ()

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front wheel bearing has slight play (2.5.A.3c)

Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

damage to nearside front tyre sidewall

general corrosion to rear suspension

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Offside Rear Tyre tread depth below requirements of 1.6mm cords showing (4.1.E.1) DANGEROUS

Brake hydraulic reservoir fluid close to minimum level (3.6.G.1b)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front wheel bearing has slight play (2.5.A.3c)

Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Rear Brake pad(s) wearing thin (3.5.1g)

damage to nearside front tyre sidewall

general corrosion to rear suspension

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

nearside front tyre has damage to sidewall

Front Brakes imbalanced across an axle (3.7.B.5b)

Nearside Front wheel bearing has excessive play (2.5.A.3c)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Nearside Front Front position lamp(s) has light sources not illuminating, but not more than 50% (1.1.A.3b)

Nearside Front tyre wall damaged

Offside Rear tyre excess wear on edges/primary rubber worn throu

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Front wheel bearing has slight play (2.5.A.3c)

Nearside Headlamp aim too high (1.8)

Nearside Front wheel bearing has slight play (2.5.A.3c)

Nearside Front wheel bearing has slight play (2.5.A.3c)

Nearside Front Front position lamp(s) not working (1.1.A.3b)

Nearside Headlamp aim too high (1.8)

Parking brake lever ratchet mechanism is excessively worn (3.1.5)

Nearside Front Rear wheel bearing has slight play (2.6.2)

Offside Headlamp aim too high (1.8)

Nearside Rear Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Rear Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

both front tyres bald on inner edge

Offside Registration plate lamp not working (1.1.C.1d)

Parking brake lever pawl spring does not push the pawl positively into the ratchet teeth (3.1.5)

Nearside Rear Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Rear Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

both front tyres bald on inner edge

Offside Front position lamp(s) not working (1.1.A.3b)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)