2007 Honda CBR600RR

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Brake pedal is bent but brake can still be readily applied (1.1.2 (d))

All direction indicators light intensity reduced (4.4.3 (a))

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Rear Brake pedal is bent but brake can still be readily applied (1.1.2 (d))

Rear Drive chain slightly loose (6.1.7 (c) (i))

Headlamp aim too high (4.1.2 (a))

All direction indicators light intensity reduced all (4.4.3 (a))

Drive chain sprocket slightly loose (6.1.7 (c) (i))

Rear Brake pedal is bent but brake can still be readily applied (1.1.2 (d))

brake hoses on front fouling fairing

Offside Rear Brake disc significantly and obviously worn heat damage due to brake lsticking on (1.1.14 (a) (i))

Rear Tyre has a lump or bulge caused by separation or partial failure of its structure heat damage to tyre (5.2.3 (d) (ii))

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Front Brake lever has insufficient reserve travel (1.1.2 (a))

Headlamp aim projected beam image obviously incorrect (4.1.2 (c))

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Horn low sound

Rear rear brake excessive effort on brake roller to obtain adequate reading

Front Roller brake test indicates a slightly juddering brake (3.3.A1b)

Front Tyre worn close to the legal limit (4.1.3(ii))

Front Roller brake test indicates a slightly juddering brake (3.3.A1b)

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front Tyre worn close to the legal limit (4.1.3(ii))

Front Brake disc(s) slightly pitted (3.2.A1l)

Exhaust noisy baffel fitted (7.1.2)

Drive chain excessively loose (6.2.1d)

Rear Registration plate with character(s) which are not the correct height (6.3.4a)

Exhaust noisy baffel fitted (7.1.2)

Front Brake hose is likely to be fouled or trapped by moving parts (3.2.B2c)

Front Brake pad(s) (sintered type) less than 1.0mm thick (3.2A1f(ii))

Registration plate with character(s) which are not the correct height (6.3.4a)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))