2003 Mercedes-benz C

Brake pad(s) worn down to wear indicator light on dash (1.1.13 (a) (i))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Front Headlamp lens seriously defective lens cloudy (4.1.1 (b) (ii))

Offside Front Anti-roll bar linkage pin or bush excessively worn drop link (5.3.4 (a) (i))

Offside Front Headlamp aim unable to be tested (4.1.2 (b))

Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Rear Seat belt retracting mechanism defective (7.1.2 (e))

Central Front auto gearbox leak sump

Central Front no inspection engine bay

Central Front unable to open bonnet

Central Rear corrosion underside of car, subframe and suspension component's

Front Inner Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))

Nearside Rear Brake hose slightly deteriorated (1.1.12 (b) (ii))

Offside Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Offside Front Outer Side repeater with a multiple light source up to 1/2 not functioning bulb out in mirror (4.4.1 (a) (i))

Offside Front Wheel bearing has slight play (5.1.3 (a) (i))

Offside Rear Brake hose slightly deteriorated (1.1.12 (b) (ii))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Rear wheel arch corrosion

Headlamp lens slightly defective both (4.1.1 (b) (i))

undertray fitted

Engine MIL inoperative or indicates a malfunction

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Nearside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Offside Front Coil spring fractured or broken (5.3.1 (b) (i))

Engine MIL inoperative or indicates a malfunction

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Nearside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Engine management light is on

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Engine management light is on

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside and nearside headlight aim slightly faded.

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Engine management light is on.

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Engine management light is on.

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Exhaust carbon monoxide content at idle exceeds default limits (8.2.1.2 (b))

Front Registration plate does not conform to the specified requirements (0.1 (d))

Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Nearside Front Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)

Nearside Rear Brake pad(s) wearing thin (3.5.1g)

Offside Front Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)

Exhaust system not adequately supported (7.1.1)

Nearside Front Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)

Nearside Rear Brake pad(s) wearing thin (3.5.1g)

Offside Front Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)

Rear exhaust clamp broken at rear but no rfrs.

Nearside Rear Brake pad(s) wearing thin (3.5.1g)

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Front wheel bearing has slight play (2.5.A.3c)

Offside Front wheel bearing has slight play (2.5.A.3c)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Upper Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Headlamp aim too low (1.8)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Headlamp aim too low (1.8)

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Offside Rear coil spring incomplete (2.4.C.1a)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)