MOT Status
ExpiredMileage
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Track rod end ball joint has slight play (2.1.3 (b) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Track rod end ball joint has slight play (2.1.3 (b) (i))
Nearside Rear Suspension arm has an unsafe modification (5.3.3 (c) (i))
Nearside Front Track rod end ball joint has slight play (2.1.3 (b) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Track rod end ball joint has slight play (2.1.3 (b) (i))
Headlamp lens slightly defective Both (4.1.1 (b) (i))
Nearside Integral body structure is corroded but structural rigidity is not significantly reduced Sill (6.1.1 (c) (i))
Nearside Rear Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Offside Integral body structure is corroded but structural rigidity is not significantly reduced Sill (6.1.1 (c) (i))
Offside Rear Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Rear Exhaust mounting defective (6.1.2 (a))
Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))
Electronic stability control warning lamp indicates a fault (7.12 (e))
Exhaust emissions exceed level of metered smoke for a turbo charged engine (8.2.2.2 (b))
Front Registration plate does not conform to the specified requirements (0.1 (d))
Nearside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced Sill X2 Holes (7.1.1 (a) (i))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Nearside Rear Position lamp not working (4.2.1 (a) (ii))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Offside Front Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Windscreen washer not working (3.5 (a))
Nearside Front Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS
Brake fluid warning lamp illuminated (1.1.10 (f))
Headlight Misted
Nearside Rear Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Brake lever has insufficient reserve travel (1.1.2 (a))
Brake pedal has insufficient reserve travel sinking to floor (1.1.2 (a))
Front Headlamp has a product on the lens so that the light output is severely reduced both lenses frosted (4.1.4 (b))
Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Offside Front Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii))
Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Engine MIL inoperative or indicates a malfunction injector blowing (8.2.2.2 (g))
Front Lower Suspension arm ball joint excessively worn both n/s and o/s (5.3.4 (a) (i))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis outrigger by subframe mount (5.3.6 (a) (i))
Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis leg (6.1.1 (c) (i))
Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Seat belt anchorage prescribed area strength or continuity significantly reduced chassis outriggers under seats both n/s and o/s (7.1.1 (a) (i))
Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear by jacking points both n/s and o/s (5.3.6 (a) (i))
n/s/r ,o/s/r , o/s/f bake plates missing
Battery insecure (1.9.1)
Offside Rear Outer Suspension spring mounting prescribed area is excessively corroded wishbone front mount (2.4.A.3) DANGEROUS
both rear jacking points crumbling.
discolouration o/s/f repeater. wipers smearing. play in both front anti-roll bar link arms.
n/s/r ,o/s/r , o/s/f bake plates missing
Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Inner Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Vehicle structure has slight corrosion (6.1.A.1)
Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Windscreen washer provides insufficient washer liquid (8.2.3)
Front Brake hose slightly deteriorated (3.6.B.4d)
all welding marked yellow
various slight surface corrosion
Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)
Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)
Electronic stability system warning lamp indicates a fault (3.4.1c)
Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Front position lamp(s) not working (1.1.A.3b)
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Rear Direction indicators not working (1.4.A.2c)
Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)
Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Steering system has slight free play detected at steering wheel (2.2.A.1b)
o/s/f tyre worn on both edges
windscreen has minor scratches
Exhaust has a major leak of exhaust gases (7.1.2)
Exhaust tailpipe not capable of allowing the emission probe to be inserted (7.4.B.1)
Nearside Rear coil spring fractured (2.4.C.1a)
Offside Rear coil spring fractured (2.4.C.1a)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Windscreen washer provides insufficient washer liquid (8.2.3)
Brake pad wear light illuminated
Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Front Brake pad(s) wearing thin (3.5.1g)
Front brake disc slightly scored (3.5.1h)
Offside Front Direction indicator not working (1.4.A.2c)
Registration plate lamp not working (1.1.C.1d)
Rear Brake lining(s) less than 1.5 mm thick (3.5.1g) DANGEROUS
Rear Shock absorber has a slightly reduced damping effect (2.7.5)
brake disc slightly scored (3.5.1h)
Wheel trims fitted.
Wheel trims fitted.
How Reliable is the Mercedes-benz Vito?
Based on 2,011,702 MOT tests across 164,434 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
KM04 AEP is a 2004 Mercedes-benz Vito in Yellow with a 2,148cc diesel engine. This vehicle has been through 25 MOT tests with a personal pass rate of 56%.
Across all 2004 Mercedes-benz Vito models, the average MOT pass rate is 67.7% with a typical mileage of 109,326 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mercedes-benz Vito fails its MOT is parking brake: efficiency below requirements, accounting for 49,564 recorded failures. If you're considering buying KM04 AEP, it's worth having these areas checked by a mechanic before committing.
The Mercedes-benz Vito typically stays on UK roads for around 29 years. At 22 years old, this Mercedes-benz Vito is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of KM04 AEP?
You can check the full history of KM04 AEP by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was KM04 AEP registered?
KM04 AEP is a 2004 Mercedes-benz Vito, first registered on 6 April 2004.
Is KM04 AEP safe to buy?
The MOT history for KM04 AEP shows 25 tests with a 56% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does KM04 AEP have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on KM04 AEP. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.