2008 Ford Ka

Nearside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))

Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))

Offside Front Suspension arm pin or bush excessively worn rear bush (5.3.4 (a) (i))

Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))

Offside Rear Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))

Rear Axle swivel pins and bushes swivel pin and/or bush excessively worn (5.1.2 (b) (i))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Brake pipe inadequately clipped or supported fouling on shock absorber (1.1.11 (d) (i))

Nearside Rear Slight corrosion around fuel flap

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Headlamp aim too high (4.1.2 (a))

Offside Headlamp aim too high (4.1.2 (a))

Offside Rear Tyre(s) of different sizes are fitted on the same axle. 175/65/13 fitted - should be 165/65/13 (5.2.3 (b))

Nearside Rear Nail in tyre

Nearside Rear Slight corrosion around fuel flap

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Items removed from driver's view prior to test screen clip ()

Nearside Front Macpherson strut mounting damaged but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Suspension component pin or bush slightly worn axle mounting (5.3.4 (a) (i))

Offside Front Macpherson strut mounting damaged but not seriously weakened (5.3.3 (b) (i))

Offside Rear Suspension component pin or bush slightly worn axle mounting (5.3.4 (a) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Inner Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Offside Front Inner Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Offside Headlamp aim too low (4.1.2 (a))

Items removed from driver's view prior to test screen clip ()

Nearside Front Macpherson strut mounting damaged but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Suspension component pin or bush slightly worn axle mounting (5.3.4 (a) (i))

Offside Front Macpherson strut mounting damaged but not seriously weakened (5.3.3 (b) (i))

Offside Rear Suspension component pin or bush slightly worn axle mounting (5.3.4 (a) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Front Upper Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive floor (2.4.A.3)

Offside Front Upper Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (2.4.A.3)

offside front seat backrest tilt lever inoperative

Battery insecure (1.9.1)

Exhaust system not adequately supported front and rear mounting brackets broken away (7.1.1)

Nearside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Upper Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive floor (2.4.A.3)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Upper Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (2.4.A.3)

offside front seat backrest tilt lever inoperative

Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

offside front seat backrest tilt lever inoperative

offside front tyre tread low on inner edge

Offside Rear wheel bearing rough when rotated (2.6.1)

Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

offside front seat backrest tilt lever inoperative

offside front tyre tread low on inner edge

Brake hydraulic reservoir fluid close to minimum level (3.6.G.1b)

both front wiper blades splitting ends

slight noise from offside rear wheel bearing

Brake hydraulic reservoir fluid close to minimum level (3.6.G.1b)

Nearside Headlamp not working on dipped beam (1.7.5a)

both front wiper blades splitting ends

slight noise from offside rear wheel bearing

nearside front wiper blade splitting ends

Tyre worn close to the legal limit (4.1.E.1)

Front Brake pad(s) wearing thin (3.5.1g)

brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

all 4 tyres cracking