2009 Honda Cr-v

Nearside Front Shock absorbers has a reduced damping effect (5.3.2 (d))

Nearside Rear Seat belt anchorage prescribed area is corroded but not considered excessive inner arch (7.1.1 (a) (i))

Nearside Rear Upper Position lamp with a multiple light source up to 1/2 not functioning (4.2.1 (a) (i))

Nearside Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Offside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

rear exhaust flange heavily corroded

repairs covered in underseal

underside corroded

Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner arch (7.1.1 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Nearside Front Shock absorbers has a reduced damping effect (5.3.2 (d))

Nearside Rear Seat belt anchorage prescribed area is corroded but not considered excessive inner arch (7.1.1 (a) (i))

Nearside Rear Upper Position lamp with a multiple light source up to 1/2 not functioning (4.2.1 (a) (i))

Nearside Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Offside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

rear exhaust flange heavily corroded

underside corroded

Front Shock absorbers has a reduced damping effect (5.3.2 (d))

Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))

Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Rear Anti-roll bar linkage damaged but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Upper Position lamp with a multiple light source up to 1/2 not functioning (4.2.1 (a) (i))

Nearside Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Rear Anti-roll bar linkage damaged but not seriously weakened (5.3.3 (b) (i))

Offside Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

rear exhaust flange seriously corroded

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))

Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Rear Exhaust mounting defective Flange corroded (6.1.2 (a))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Front Anti-roll bar linkage ball joint has slight play Both (5.3.4 (a) (i))

Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt Both (2.1.3 (g) (i))

Engine MIL inoperative or indicates a malfunction (8.2.2.2 (g))

Front Anti-roll bar linkage ball joint has slight play Both (5.3.4 (a) (i))

Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt Both (2.1.3 (g) (i))

Nearside Front Tyre worn close to legal limit/worn on edge edge (5.2.3 (e))

Nearside Rear Tyre worn close to legal limit/worn on edge limits (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge edge (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge limits (5.2.3 (e))

Brake pedal anti-slip provision missing (1.1.2 (c))

Nearside Front Tyre worn close to legal limit/worn on edge edge (5.2.3 (e))

Nearside Rear Tyre worn close to legal limit/worn on edge limits (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge edge (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge limits (5.2.3 (e))

Offside Rear Registration plate lamp not working (1.1.C.1d)

Front both n/s and o/s strut gaiters split

Offside Front Brake pad(s) wearing thin pads getting low (3.5.1g)

Brake pedal anti-slip provision incomplete pad split (3.3.A.1b)

brake disc in such a condition that it is seriously weakened both front (3.5.1i)

Front both n/s and o/s strut gaiters split

Offside Front Brake pad(s) wearing thin pads getting low (3.5.1g)

Exhaust emits excessive smoke or vapour of any colour (7.4.B.4)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Front Brake pad(s) wearing thin (3.5.1g)