2003 Chrysler Grand Voyager

Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Suspension arm has slight play in a pin/bush wishbone rear bush (2.4.G.2)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

play in both steering rack inner joints

Nearside Front Outer Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Front Outer Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)

Offside Front Suspension arm has excessive play in a ball joint (2.4.G.2)

Offside Rear Outer Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)

Offside Registration plate lamp not working (1.1.C.1d)

Parking brake: efficiency below requirements (3.7.B.7)

Front Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement both sides (2.4.G.2)

Offside Front Suspension arm has slight play in a pin/bush wishbone rear bush (2.4.G.2)

Parking brake lever has little reserve travel (3.1.6b)

Play in steering rack inner joint(s) ()

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Parking brake: efficiency below requirements (3.7.B.7)

Brake fluid warning lamp illuminated (3.6.G.2)

Nearside Rear Inner Brake pipe excessively corroded (3.6.B.2c)

Offside Front Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g) DANGEROUS

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

child seat fitted not allowing full inspection of belt

front number plate damaged but legible

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

high level stop lamp inop

Battery insecure (1.9.1)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Headlamp has a product on the lens so that the light output is severely reduced (1.7.5a)

Offside Headlamp has a product on the lens so that the light output is severely reduced (1.7.5a)

Offside Outer Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

high level stop lamp inop

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Oil leak

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Rear Direction indicator incorrect colour (1.4.A.2f)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside Rear Direction indicator incorrect colour (1.4.A.2f)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake lever has no reserve travel (3.1.6b)

Parking brake: efficiency below requirements (3.7.B.7)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Oil leak

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Headlamp aim too low (1.8)

Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Headlamp excessively deteriorated so that the light output is severely reduced (1.7.5a)

rear brake application uneven (3.7.B.2)

rear brakes release unevenly (3.7.B.4)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Parking brake: efficiency below requirements (3.7.B.7)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)