2005 Honda Anf 125-5

kick start is close to exhaust but still in working order

main stand wired up

Drive chain excessively loose (6.2.1d)

Exhaust excessively deteriorated (7.1.1a)

Front Brake disc(s) excessively worn (3.2.A1l)

Front Brake pad(s) (sintered type) less than 1.0mm thick (3.2A1f(ii))

Front Footrest insecure (6.2.1a)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Front Wheel has an excessively distorted bead rim. (4.2.2)

Front shock absorber seal failed and leaking oil (2.3.3)

Headlamp insecure (1.2.3b)

Horn is not a constant note (1.7.3c)

Rear Drive chain sprocket worn to excess (6.2.1e)

Roller brake test Neither brake control achieves an efficiency of 25% (3.3.A2b)

Roller brake test No brake control achieves an efficiency of 30%. (3.3.A2a)

Steering movement excessively 'notchy' with the weight on the lower bearing (2.2.1a)

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Rear Brake lining(s) close to minimum limit (3.2.A1f(i))

Rear Wheel has a slightly distorted bead rim. (4.2.2)

outer barend missing

senter stand damaged

Brake master cylinder fluid level low (3.2.B1d)

Drive chain slightly loose (6.2.1d)

Steering movement slightly 'notchy' (2.2.1b)

Front Front position lamp flickers when tapped lightly by hand (1.1.3c)

Front Headlamp aim too low (1.6)

Front Tyre not fitted in accordance with side wall instruction/s (4.1.2e)