2007 Mercedes-benz Vito

eml on

Central Stop lamp(s) non-obligatory stop lamp not working (4.3.1 (a) (ii))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Rear reflector defective or damaged by up to 50% of the reflecting surface (4.8.1 (a) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced chassis rails (6.1.1 (c) (i))

Bonnet cannot be secured in the closed position (3.1 (b) (i))

Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Nearside Parking brake inoperative on one side (1.4.1 (a))

Offside Parking brake inoperative on one side (1.4.1 (a))

Offside Rear Direction indicator not working (4.4.1 (a) (ii))

Offside Rear Position lamp lens seriously defective missing lens (4.2.1 (b))

Offside Rear Position lamp light intensity significantly reduced (4.2.3 (a) (ii))

Offside Rear Rear fog lamp not working (4.5.1 (a) (ii))

Offside Stop lamp(s) not working (4.3.1 (a) (ii))

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Rear reflector defective or damaged by up to 50% of the reflecting surface (4.8.1 (a) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced chassis rails (6.1.1 (c) (i))

eml on

Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))

Front Brake pipe corroded, covered in grease or other material both sides (1.1.11 (c))

Front Coil spring corroded both sides (5.3.1 (b) (i))

Front Inner Tyre worn close to legal limit/worn on edge edges (both sides) (5.2.3 (e))

Front Shock absorbers has a slightly worn bush both sides (5.3.2 (c))

Front Steering component mounting prescribed area is corroded but not considered excessive (2.1.2 (e) (i))

Front Suspension component mounting prescribed area is corroded but not considered excessive both sides (5.3.6 (a) (i))

Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security all underneath (6.2.2 (d) (i))

Offside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))

Rear Brake pipe corroded, covered in grease or other material both sides (1.1.11 (c))

Rear Coil spring corroded both sides (5.3.1 (b) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive both sides (5.3.6 (a) (i))

Rear Vehicle structure is deformed but structural rigidity is not significantly reduced (6.1.1 (a) (i))

Sub-frame pin or bush worn but not resulting in excessive movement front & rear (5.3.4 (a) (i))

Subframe mounting prescribed area is corroded but not considered excessive front & rear (5.3.6 (a) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Offside Front Brake pipe excessively corroded (1.1.11 (c))

Offside Rear fog lamp not working (4.5.1 (a) (ii))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Track rod end ball joint has excessive play (2.1.3 (b) (i))

Offside Rear Coil spring fractured or broken (5.3.1 (b) (i))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Fuel tank so insecure there is a risk of fire (6.1.3 (a) (ii)) DANGEROUS

Nearside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis both sides (2.4.A.3)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Rear coil spring broken (2.4.C.1a)

Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside front brake binding (3.7.B.1)

Offside front brake binding (3.7.B.1)

Rear fog lamp not working (1.3.2b)

Nearside Headlamp not working on dipped beam (1.7.5a)

Offside Rear fog lamp not working (1.3.2b)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Rear brake disc in such a condition that it is seriously weakened (3.5.1i)

Nearside Rear position lamp(s) not working (1.1.A.3b)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside Rear brake disc in such a condition that it is seriously weakened (3.5.1i)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake lever has no reserve travel (3.1.6b)

Parking brake: efficiency below requirements (3.7.B.7)

Nearside Registration plate lamp not working (1.1.C.1d)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone 'A' (8.3.1e)

Windscreen has damage to an area in excess of a 10mm circle within zone 'A' (8.3.1a)