2007 Seat Altea

Nearside Rear Service brake excessively binding (1.2.1 (f))

Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))

Nearside Rear Brake disc in such a condition that it is seriously weakened (1.1.14 (a) (ii)) DANGEROUS

Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Offside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Exhaust mounting defective missing (6.1.2 (a))

Rear exhaust silencer corroded

Nearside Rear Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear exhaust silencer corroded

Rear beam axle - heavily corroded

Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt damaged/split too excess (6.1.7 (g) (ii))

Nearside Rear Anti-roll bar linkage insecurely attached insecure/broken (5.3.3 (a) (i))

Offside Rear Anti-roll bar linkage insecurely attached insecure/broken (5.3.3 (a) (i))

Offside Rear Tyre worn close to legal limit/worn on edge worn on inner edge - VERY almost too excess - VERY close too limit - 2mm (5.2.3 (e))

Rear beam axle - heavily corroded

Oil leaking excessively from engine (8.4.1 (a) (i))

Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))

Child Seat fitted not allowing full inspection of adult belt ()

Child Seat fitted not allowing full inspection of adult belt ()

Driver's airbag obviously inoperative (7.1.5 (c))

Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Nearside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Rear Outer Brake pad(s) wearing thin (3.5.1g)

Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Rear tyres starting to wear smooth to inner and outer edges

Nearside Rear Inner Trailing arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Rear Tie bar/rod has excessive play in a pin/bush (2.4.G.2)

Offside Front Headlamp aim too high (1.8)

Offside Rear Outer Trailing arm synthetic bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Rear Tie bar/rod has excessive play in a pin/bush (2.4.G.2)

Nearside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Rear Outer Brake pad(s) wearing thin (3.5.1g)

Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Rear tyres starting to wear smooth to inner and outer edges

Nearside Rear Tie bar/rod rubber bush deteriorated but not resulting in excessive movement and offside rear (2.4.G.2)

Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement and offside rear (2.4.G.2)

Nearside Front Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Nearside Rear Direction indicator incorrect colour (1.4.A.2f)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside Rear Direction indicator incorrect colour (1.4.A.2f)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Front Suspension arm has excessive play in a pin/bush (2.4.G.2)

Offside Front Suspension arm has excessive play in a pin/bush (2.4.G.2)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)