2009 Chrysler-jeep Grand Voyager

Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Brake hose has slight corrosion to ferrule all four corners (1.1.12 (f) (i))

Brake pipe corroded, covered in grease or other material all four corners have a protective metal winding which is corroded not allowing full inspection of brake pipe (1.1.11 (c))

Central Stop lamp(s) non-obligatory stop lamp not working (4.3.1 (a) (ii))

Nearside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Offside Front Outer Brake pad(s) wearing thin over 3/4 worn (1.1.13 (a) (ii))

Offside Front Road wheel slightly distorted (5.2.2 (c) (i))

Brake hose has slight corrosion to ferrule all four corners (1.1.12 (f) (i))

Brake pipe corroded, covered in grease or other material all four corners have a protective metal winding which is corroded not allowing full inspection of brake pipe (1.1.11 (c))

Central Stop lamp(s) non-obligatory stop lamp not working (4.3.1 (a) (ii))

Nearside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Offside Front Outer Brake pad(s) wearing thin over 3/4 worn (1.1.13 (a) (ii))

Offside Front Road wheel slightly distorted (5.2.2 (c) (i))

Offside Rear Position lamp not working (4.2.1 (a) (ii))

Offside Stop lamp(s) not working (4.3.1 (a) (ii))

Brake pipe corroded, covered in grease or other material all 4 pipes have a protective coil which is corroded and not allowing full inspection of brake pipes condition. (1.1.11 (c))

Central Stop lamp(s) non-obligatory stop lamp not working (4.3.1 (a) (ii))

Nearside Front Road wheel slightly distorted (5.2.2 (c) (i))

Brake pipe corroded, covered in grease or other material all brake pipes have a protective coil which is corroded and not allowing full inspection of brake pipe (1.1.11 (c))

Nearside Front Direction indicator slightly discoloured (4.4.3 (a))

Offside Front Direction indicator slightly discoloured (4.4.3 (a))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

brake pipes on all 4 corners fitted with a protective metal coil which is corroded and does not allow full inspection of the brake pipe condition

Central Stop lamp(s) not working (4.3.1 (a) (ii))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

brake pipes on all 4 corners fitted with a protective metal coil which is corroded and does not allow full inspection of the brake pipe condition

rear exhaust heat shield loose

Engine MIL inoperative or indicates a malfunction (8.2.2.2 (g))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Rear Service brake lagging in operation (1.2.1 (d))

Nearside Front Service brake fluctuating, but not excessively (1.2.1 (e))

Offside Front Service brake fluctuating, but not excessively (1.2.1 (e))

brake hose ferrules and brake pipes a little rusty from standing.

parking brake and footbrake faulty on the offside rear.

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

N/a mirror damaged

Rear Brake pad(s) wearing thin (3.5.1g)

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Emissions too clean

Nearside Obligatory mirror obscured but not seriously affecting the rear view (8.1.2a)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Electronic stability system warning lamp indicates a fault (3.4.1c)

Fuel cap/sealing device mounting flange/sealing method defective (7.2.4c)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Nearside Rear position lamp(s) not working (1.1.A.3b)

Nearside Registration plate lamp not working (1.1.C.1d)

Nearside Stop lamp not working (1.2.1b)

Offside Registration plate lamp not working (1.1.C.1d)

rear brake application uneven (3.7.B.2)

Emissions too clean

Front number plate cracked

Nearside Obligatory mirror obscured but not seriously affecting the rear view (8.1.2a)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

OSR brake has a slight bind

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Both rear tyres poor condition, wearing low and worn on outer edges

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Obligatory mirror damaged, but not seriously affecting the rear view (8.1.2a)

Nearside Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

slight rear brake pulsation

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front brake disc in such a condition that it is seriously weakened (3.5.1i)

Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g) DANGEROUS

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Front Bumper insecure

Nearside Obligatory mirror damaged, but not seriously affecting the rear view (8.1.2a)

Nearside Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

slight rear brake pulsation

Engine covers fitted obscuring some components in the engine bay

Under-trays fitted obscuring some underside components

emisions to clean regester

sill covers fitted