MOT Status
ValidMileage
120,795 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Upper Suspension component ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Front Upper Suspension component ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Rear Lower Suspension arm corroded but not seriously weakened both n/s and o/s (5.3.3 (b) (i))
Rear Lower Suspension component mounting prescribed area is corroded but not considered excessive both n/s and o/s control arm (5.3.6 (a) (i))
Rear Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Rear Subframe mounting prescribed area is corroded but not considered excessive both n/s and o/s (5.3.6 (a) (i))
Rear Suspension arm pin or bush worn but not resulting in excessive movement all rear bushes perishing (5.3.4 (a) (i))
Rear bumper reinforcer badly corroded
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Nearside Headlamp lens seriously defective (4.1.1 (b) (ii))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Headlamp lens seriously defective (4.1.1 (b) (ii))
Nearside Front Upper Suspension component ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Front Upper Suspension component ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Rear Lower Suspension arm corroded but not seriously weakened both n/s and o/s (5.3.3 (b) (i))
Rear Lower Suspension component mounting prescribed area is corroded but not considered excessive both n/s and o/s control arm (5.3.6 (a) (i))
Rear Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Rear Subframe mounting prescribed area is corroded but not considered excessive both n/s and o/s (5.3.6 (a) (i))
Rear Suspension arm pin or bush worn but not resulting in excessive movement all rear bushes perishing (5.3.4 (a) (i))
Rear bumper reinforcer badly corroded
Nearside Front Upper Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Rear Nail in tyre ()
Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill area (5.3.6 (a) (i))
Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive Inner sill area (5.3.6 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear heat shield loose
Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Nearside Front Upper Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Rear Nail in tyre ()
Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill area (5.3.6 (a) (i))
Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive Inner sill area (5.3.6 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear heat shield loose
Nearside Front Upper Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill area (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive Inner sill (5.3.6 (a) (i))
Offside Rear Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner arch (5.3.6 (a) (i))
Nearside Front Upper Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill area (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive Inner sill (5.3.6 (a) (i))
Offside Rear Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Front Tyre worn close to legal limit/worn on edge bothsides (5.2.3 (e))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Central Seat belt buckle missing (7.1.2 (d))
Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Front Tyre worn close to legal limit/worn on edge bothsides (5.2.3 (e))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Front Position lamp not working both (4.2.1 (a) (ii))
Nearside Rear Brake pipe excessively corroded (1.1.11 (c))
Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge inner edge (5.2.3 (e))
Offside Rear Tyre worn close to legal limit/worn on edge inner edge (5.2.3 (e))
o/s front tyre wearing on outer edge
rear boot floor repaired
Nearside Front Headlamp aim too high (1.8)
Offside Rear rear brake binding (3.7.B.1)
Parking brake: efficiency below requirements (3.7.B.7)
Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)
Rear rear brake application uneven (3.7.B.2)
o/s front tyre wearing on outer edge
rear boot floor repaired
o/s/r tyre cracking in tread
How Reliable is the Mazda 6?
Based on 1,904,140 MOT tests across 159,651 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
KM60 GVF is a 2011 Mazda 6 in Black with a 1,999cc petrol engine. This vehicle has been through 19 MOT tests with a personal pass rate of 68.4%.
Across all 2011 Mazda 6 models, the average MOT pass rate is 76.6% with a typical mileage of 83,695 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 6 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 45,082 recorded failures. If you're considering buying KM60 GVF, it's worth having these areas checked by a mechanic before committing.
The Mazda 6 typically stays on UK roads for around 24 years. At 15 years old, this Mazda 6 is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of KM60 GVF?
You can check the full history of KM60 GVF by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was KM60 GVF registered?
KM60 GVF is a 2011 Mazda 6, first registered on 22 January 2011.
Is KM60 GVF safe to buy?
The MOT history for KM60 GVF shows 19 tests with a 68.4% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does KM60 GVF have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on KM60 GVF. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.