2014 Peugeot 208

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened both side (1.1.14 (a) (ii))

Front Brake pad(s) wearing thin both side (1.1.13 (a) (ii))

Front Suspension arm pin or bush worn but not resulting in excessive movement both side (5.3.4 (a) (i))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Brake hose has slight corrosion to ferrule both side (1.1.12 (f) (i))

Rear Exhaust mounting defective (6.1.2 (a))

Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Emissions unable to be completed due to oil leak and possibly internally damaging engine (8.2.2.2 (e))

Exhaust system insecure (6.1.2 (a))

Front Suspension arm ball joint excessively worn both sides (5.3.4 (a) (i))

Offside Front Headlamp aim unable to be tested (4.1.2 (b))

Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Oil leaking excessively from engine (8.4.1 (a) (i))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Items removed from driver's view prior to test ()

oil level below minimum mark on dipstick

Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear fog lamp lens defective which has no effect on emitted light (4.5.1 (b) (i))

Windscreen washer not working (3.5 (a))

Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear fog lamp lens defective which has no effect on emitted light (4.5.1 (b) (i))

Rear Exhaust mounting defective (6.1.2 (a))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Tyre tread depth below requirements of 1.6mm inner & outer (5.2.3 (e)) DANGEROUS

Nearside Rear Tyre tread pattern not visible over the whole tread area when minimum depth required is 1.0mm (5.2.3 (e)) DANGEROUS

Offside Rear Tyre tread pattern not visible over the whole tread area when minimum depth required is 1.0mm (5.2.3 (e)) DANGEROUS

Offside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Exhaust mounting defective back box mounting (6.1.2 (a))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Rear Tyre starting to perish (crack)