2012 Toyota Verso

Nearside Front Anti-roll bar ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Anti-roll bar ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Horn not working (7.7 (a))

Nearside Front Anti-roll bar ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Anti-roll bar ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Brake disc worn, pitted or scored, but not seriously weakened all front and rear (1.1.14 (a) (ii))

Coil spring corroded OS front and Both rear (5.3.1 (b) (i))

Front wiper blade/s juddering / smearing

Nearside Front Service brake fluctuating, but not excessively approx 30 KgF (1.2.1 (e))

Nearside Rear Child Seat fitted not allowing full inspection of adult belt central row

Rear Brake hose has slight corrosion to ferrule all (1.1.12 (f) (i))

Rear Brake pad(s) wearing thin NS AND OS (1.1.13 (a) (ii))

Tyre/s have a cuts but not deep enough to reach the ply or cords + rear tyres MRF 2016 and 2018

horn worked at time of inspection after few attempts. Passed and advised

minor corrosion to some underbody components / panels

Brake disc worn, pitted or scored, but not seriously weakened all front and rear (1.1.14 (a) (ii))

Coil spring corroded OS front and Both rear (5.3.1 (b) (i))

Front wiper blade/s juddering / smearing

Nearside Front Position lamp not working PRS: replaced 501 bulb (4.2.1 (a) (ii))

Nearside Front Service brake fluctuating, but not excessively approx 30 KgF (1.2.1 (e))

Nearside Rear Child Seat fitted not allowing full inspection of adult belt central row

Rear Brake hose has slight corrosion to ferrule all (1.1.12 (f) (i))

Rear Brake pad(s) wearing thin NS AND OS (1.1.13 (a) (ii))

Tyre/s have a cuts but not deep enough to reach the ply or cords + rear tyres MRF 2016 and 2018

horn worked at time of inspection after few attempts. Passed and advised

minor corrosion to some underbody components / panels

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Front Registration plate inscription illegible (0.1 (b))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Front Tyre(s) with different aspect ratios are fitted on the same axle. (5.2.3 (b))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (i))

Front Brake pad(s) wearing thin 2mm front brakes (3.5.1g)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Front Brake pad(s) wearing thin 2mm front brakes (3.5.1g)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Front Headlamp not working on dipped beam (1.7.5a)

Nearside Rear Rear position lamp(s) not working (1.1.A.3b)

Offside Front Front position lamp(s) not working (1.1.A.3b)