2006 Ford Galaxy

Brake pipe clips or supports missing, pipe adequately supported (1.1.11 (d) (i))

Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement Rear (5.3.4 (a) (i))

Offside Front Anti-roll bar ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement Rear (5.3.4 (a) (i))

Central Rear Seat belt flexible stalk deteriorated but not likely to lead to failure under load (5.2.4a)

Front Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Non obligatory mirror damaged ()

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Obligatory mirror damaged, but not seriously affecting the rear view (8.1.2a)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Rear Brake pad(s) wearing thin (3.5.1g)

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Front Tyre has ply or cords exposed (4.1.D.1b)

Offside Front Tyre has ply or cords exposed (4.1.D.1b)

Offside Registration plate lamp not working (1.1.C.1d)

Offside Stop lamp not working (1.2.1b)

Central Rear Seat belt flexible stalk deteriorated but not likely to lead to failure under load (5.2.4a)

Front Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Non obligatory mirror damaged ()

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Obligatory mirror damaged, but not seriously affecting the rear view (8.1.2a)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Rear Brake pad(s) wearing thin (3.5.1g)

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Centre Stop lamp not working (1.2.1b)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

registration plate character(s) incorrectly spaced front and rear (6.3.4a)

covers fit

front discs and pads wearing

heat shield loose

low fuel warning illuminated

oil leak

oil/coolant/pas fluids low

parking brake release button missing

suspension bushes deteriorating

Front Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Direction indicator incorrect colour (1.4.A.2f)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Direction indicator incorrect colour (1.4.A.2f)

Offside Rear position lamp(s) not working (1.1.A.3b)

covers fit

front discs and pads wearing

heat shield loose

low fuel warning illuminated

oil leak

oil/coolant/pas fluids low

parking brake release button missing

suspension bushes deteriorating

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Headlamp insecure (1.7.3)

Nearside Rear Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside Rear position lamp(s) not working (1.1.A.3b)

Front bumper insecure

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Rear Brake pad(s) wearing thin (3.5.1g)

Horn not working (1.6.2a)

Nearside Front Seat belt insecurely fixed to the seat (5.2.1a)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)