2006 Mercedes-benz Vito

Central Exhaust has a major leak of exhaust gases (6.1.2 (a))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Rear Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Rear Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Rear Vehicle structure excessively corroded within 30cm of towbar mounting (6.1.6 (i) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Rear Exhaust system insecure (6.1.2 (a))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Offside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Track rod end ball joint has excessive play (2.1.3 (b) (i))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Track rod end ball joint has excessive play (2.1.3 (b) (i))

Nearside Rear Tyre has ply or cords damaged (5.2.3 (d) (ii)) DANGEROUS

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Windscreen washer provides insufficient washer liquid (3.5 (a))

Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Brake hose slightly deteriorated nearside + offside front (1.1.12 (b) (ii))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

nearside beamset pattern becoming poor.

nearside front passenger seat belt becoming slow to retract

Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))

Brake hose slightly deteriorated nearside + offside front (1.1.12 (b) (ii))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

nearside beamset pattern becoming poor.

nearside front passenger seat belt becoming slow to retract

Brake pipe corroded, covered in grease or other material offside front + offside rear (1.1.11 (c))

Suspension component mounting prescribed area is corroded but not considered excessive nearside + offside front floor pans (5.3.6 (a) (i))

nearside beamset pattern becoming poor

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor pan (5.3.6 (a) (i))

Brake pipe corroded, covered in grease or other material offside front + offside rear (1.1.11 (c))

Suspension component mounting prescribed area is corroded but not considered excessive nearside + offside front floor pans (5.3.6 (a) (i))

nearside beamset pattern becoming poor

Nearside + offside front floor pans slightly corroded .

Nearside Brake hose slightly deteriorated + offside front (1.1.12 (b) (ii))

Nearside parking brake little reserve travel.

Offside Brake pipe corroded, covered in grease or other material front + offside rear (1.1.11 (c))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Nearside Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front brake pipe slightly corroded.

Nearside Front Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front brake pipe slightly corroded.

Nearside Parking brake lever has no reserve travel (3.1.6b)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Supplementary Restraint System warning lamp indicates a fault (5.4.2)

Offside Rear Tyre not fitted in accordance with side wall instructions (4.1.D.1f)

Offside Rear coil spring fractured (2.4.C.1a)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)