2008 Chrysler 300 C

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Electronic stability control warning lamp indicates a fault (7.12 (e))

Electronic stability control warning lamp indicates a fault (7.12 (e))

Front Service brake excessively binding both (1.2.1 (f))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Service brake efficiency below requirements (1.2.2 (a) (i))

Nearside Rear Inner Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Front Inner Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Front Brake disc worn, pitted or scored, but not seriously weakened both (1.1.14 (a) (ii))

Front Suspension arm corroded but not seriously weakened all (5.3.3 (b) (i))

Offside Front Outer Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Brake disc worn, pitted or scored, but not seriously weakened both (1.1.14 (a) (ii))

Rear Brake hose has slight corrosion to ferrule all (1.1.12 (f) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Subframe mounting prescribed area is corroded but not considered excessive all (5.3.6 (a) (i))

Rear Suspension arm corroded but not seriously weakened all (5.3.3 (b) (i))

Lower Suspension arm corroded but not seriously weakened all (5.3.3 (b) (i))

Nearside Rear Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Front Shock absorbers light misting of oil or has limited damping effect both shocks (5.3.2 (b))

Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security prescribed areas (6.2.2 (d) (i))

Offside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Parking brake lever defective but can be satisfactorily operated (1.1.6 (d))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Rear Brake disc in such a condition that it is seriously weakened (1.1.14 (a) (ii)) DANGEROUS

Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Parking brake: efficiency below requirements (3.7.B.7)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Tyre pressure monitoring system warning lamp does not illuminate (4.1.D.4)

Emissions not tested (7.0)

Fuel system component leaking (7.2.3)

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Registration plate lamp not working (1.1.C.1d)

Parking brake: efficiency below requirements (3.7.B.7) DANGEROUS

Nearside Front Shock absorber has a light misting of oil (2.7.3)

Nearside Rear wheel bearing has slight play (2.6.2)

Offside Front Shock absorber has a light misting of oil (2.7.3)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front position lamp(s) not working (1.1.A.3b)

Parking brake lever has no reserve travel (3.1.6b)

Parking brake: efficiency below requirements (3.7.B.7)

Nearside Front Shock absorber has a light misting of oil (2.7.3)

Nearside Rear wheel bearing has slight play (2.6.2)

OFFSIDE REAR BRAKE BINDING SLIGHTLY

Offside Front Shock absorber has a light misting of oil (2.7.3)