2003 Audi A2

Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Front Service brake excessively fluctuating (1.2.1 (e))

Nearside Front Suspension arm corroded and seriously weakened (5.3.3 (b) (i))

Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Rear Hydraulic brake cylinder leaking hydraulic fluid (1.1.16 (b) (i))

Nearside Rear Service brake effort inadequate at a wheel (1.2.1 (a) (i))

Offside Front Service brake lagging in operation (1.2.1 (d))

Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Service brake efficiency below requirements (1.2.2 (a) (i))

Front Brakes imbalanced across an axle by more than 50% (1.2.1 (b) (ii)) DANGEROUS

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Rear Service brake binding but not excessively (1.2.1 (f))

Oil leak, but not excessive (8.4.1 (a) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Rear Service brake binding but not excessively (1.2.1 (f))

Nearside Front Suspension arm corroded and seriously weakened (5.3.3 (b) (i))

Nearside Rear Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))

Offside Front Direction indicator incorrect colour (4.4.3 (a))

Offside Rear Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Nearside Rear Suspension rod pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Suspension rod pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front brake pad wiring loom rubbing on the wheel. incorrect rooting

Oil leak, but not excessive (8.4.1 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Rear Suspension spring mounting prescribed area is corroded but not considered excessive Corrosion on both rear springs. (5.3.6 (a) (i))

Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Nearside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Offside Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Headlamp aim too high (4.1.2 (a))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Nearside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Nearside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Headlamp excessively deteriorated so that the light output is severely reduced (1.7.5a)

Nearside Front Inner Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Rear Shock absorber has a serious fluid leak (2.7.3)

Parking brake: efficiency below requirements (3.7.B.7)

o/s/f tyre wearing on edges

Nearside Headlamp aim too low (1.8)

Rear Direction indicator incorrect colour (1.4.A.2f)

Rear rear brake application uneven (3.7.B.2)

n/s/f top mount sticking

o/s/f tyre wearing on edges

airbag light on

rear no/plate deterioration

Nearside Headlamp not in good working order adversely affecting beam image (1.2.4a)