2004 Honda Civic

Front Headlamp has a product on the lens but not seriously reducing light output both sides (4.1.4 (b))

Front Sub-frame corroded but not seriously weakened and rear (5.3.3 (b) (i))

Front Subframe mounting prescribed area is corroded but not considered excessive and rear (5.3.6 (a) (i))

Front Subframe mounting repair covered in underseal and rear (5.3.6 (a) (i))

Front Suspension component corroded but not seriously weakened and rear (5.3.3 (b) (i))

Inner vehicle body sills corroded on both sides

Outer vehicle body sills covered up with plastic trims on both sides

Parking brake lever defective but can be satisfactorily operated Lever travel reserve (1.1.6 (d))

Offside Rear Outer Exhaust has a major leak of exhaust gases exhaust pipe (6.1.2 (a))

Offside Rear Outer Exhaust noise is clearly in excess of that emitted by a similar vehicle fitted with a standard silencer in average condition exhaust pipe (8.1.1 (a))

Front Headlamp aim projected beam image is obviously incorrect both sides (4.1.2 (c))

Front Headlamp has a product on the lens but not seriously reducing light output both sides (4.1.4 (b))

Front Sub-frame corroded but not seriously weakened and rear (5.3.3 (b) (i))

Front Subframe mounting prescribed area is corroded but not considered excessive and rear (5.3.6 (a) (i))

Front Subframe mounting repair covered in underseal and rear (5.3.6 (a) (i))

Front Suspension component corroded but not seriously weakened and rear (5.3.3 (b) (i))

Inner vehicle body sills corroded on both sides

Outer vehicle body sills covered up with plastic trims on both sides

Bonnet cannot be secured in the closed position (3.1 (b) (i))

Emissions unable to be completed (8.2.1.2 (d))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Headlamp lens seriously defective (4.1.1 (b) (ii))

Nearside Rear Inner Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i))

Offside Front Outer Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Headlamp lens seriously defective (4.1.1 (b) (ii))

Offside Rear Inner Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i))

Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))

All round suspension systems corroded & rusty

Brake operation pressure/vacuum assistance close to minimum requirement (1.1.3 (a) (i))

Front Brake hose has slight corrosion to ferrule Both sides (1.1.12 (f) (i))

Items removed from driver's view prior to test ()

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Outer Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Tyre slightly damaged/cracking or perishing Size 195.60.R 15 (5.2.3 (d) (ii))

Nearside Rear Fuel Pipe/s corroded ()

Offside Front Service brake binding but not excessively (1.2.1 (f))

Offside Front Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Offside Windscreen wiper blade defective (3.4 (b) (i))

Rear Brake pipe corroded, covered in grease or other material Both sides (1.1.11 (c))

Rear Service brake imbalance requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Rear Suspension arm pin or bush worn but not resulting in excessive movement All (5.3.4 (a) (i))

Rear Tyre slightly damaged/cracking or perishing Both sides (5.2.3 (d) (ii))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced Both sides (6.1.1 (c) (i))

Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security Both sides (6.2.2 (d) (i))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Coil spring corroded Both (5.3.1 (b) (i))

Central Exhaust has a major leak of exhaust gases (6.1.2 (a))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Coil spring corroded Both (5.3.1 (b) (i))

Nearside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement Front bush (5.3.4 (a) (i))

Rear suspension components corroded slightly

Brake operation pressure/vacuum assistance close to minimum requirement (1.1.3 (a) (i))

Nearside Front Headlamp lens slightly defective (4.1.1 (b) (i))

Nearside Front Obligatory mirror slightly loose (3.3 (b) (i))

Nearside Lower Vehicle structure is corroded but structural rigidity is not significantly reduced Inner sill (6.1.1 (c) (i))

Nearside Rear Fuel Pipe/s corroded ()

Offside Front Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement outer bush (5.3.4 (a) (i))

Offside Lower Vehicle structure is corroded but structural rigidity is not significantly reduced Inner sill (6.1.1 (c) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))

Parking brake lever has reserve travel

Rear Registration plate insecure but not likely to fall off (0.1 (a))

Rear Service brake imbalance requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive Both sides (Arm bush mounting) (5.3.6 (a) (i))

Rear Suspension system corroded & rusty

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced Both sides (6.1.1 (c) (i))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Brake operation pressure/vacuum assistance close to minimum requirement (1.1.3 (a) (i))

Nearside Front Headlamp lens slightly defective (4.1.1 (b) (i))

Nearside Front Obligatory mirror slightly loose (3.3 (b) (i))

Nearside Lower Vehicle structure is corroded but structural rigidity is not significantly reduced Inner sill (6.1.1 (c) (i))

Nearside Rear Fuel Pipe/s corroded ()

Offside Front Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement outer bush (5.3.4 (a) (i))

Offside Lower Vehicle structure is corroded but structural rigidity is not significantly reduced Inner sill (6.1.1 (c) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))

Parking brake lever has reserve travel

Rear Registration plate insecure but not likely to fall off (0.1 (a))

Rear Service brake imbalance requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive Both sides (Arm bush mounting) (5.3.6 (a) (i))

Rear Suspension system corroded & rusty

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced Both sides (6.1.1 (c) (i))

Headlamp has a product on the light source but not seriously reducing light output both deterioated (4.1.4 (b))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement front bush (5.3.4 (a) (i))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Nearside Front Suspension arm pin or bush excessively worn front bush (5.3.4 (a) (i))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Headlamp has a product on the light source but not seriously reducing light output both deterioated (4.1.4 (b))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement front bush (5.3.4 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Rear Child Seat fitted not allowing full inspection of adult belt ()

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Headlamp aim projected beam image is obviously incorrect both (4.1.2 (c))

Registration plate lamp inoperative in the case of a single lamp or all lamps both (4.7.1 (b) (ii))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Rear Child Seat fitted not allowing full inspection of adult belt ()

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Front Headlamp aim not tested (4.1.2 (b))

Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Nearside Rear Child Seat fitted not allowing full inspection of adult belt ()

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Front Brake pad(s) wearing thin (3.5.1g)

Front Headlamp deteriorated but light output not reduced both (1.7.5a)

Nearside front brake fluctuating, but not excessively (3.7.B.3)

Front Headlamp aim beam image obviously incorrect both (1.8.A.1b)

Nearside Front Anti-roll bar ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt drop link (2.4.G.2)

Offside Front Anti-roll bar has excessive play in a ball joint drop link (2.4.G.2)

Front Brake pad(s) wearing thin (3.5.1g)

Front Headlamp deteriorated but light output not reduced both (1.7.5a)

Nearside front brake fluctuating, but not excessively (3.7.B.3)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Lower Ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.2.C.1c)

Nearside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement front bush (2.4.G.2)

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement front bush (2.4.G.2)

Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Front Tyre worn close to the legal limit (4.1.E.1)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

front/rear wiper blades worn

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

rear tyre cracking

N/S/F tyre has cut on sidewall