2014 Peugeot 208

Front Brake pad(s) wearing thin both n/s & o/s inner pads low (1.1.13 (a) (ii))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Exhaust mounting defective (6.1.2 (a))

Tyre slightly damaged/cracking or perishing All 4 tyres cracking (5.2.3 (d) (ii))

Rear Brake pad(s) less than 1.5 mm thick both n/s & o/s inner pads (1.1.13 (a) (ii)) DANGEROUS

Front Brake pad(s) wearing thin both n/s & o/s inner pads low (1.1.13 (a) (ii))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Exhaust mounting defective (6.1.2 (a))

Rear Brake disc worn, but not excessively both n/s & o/s discs worn (1.1.14 (a) (i))

Tyre slightly damaged/cracking or perishing All 4 tyres cracking (5.2.3 (d) (ii))

Central Stop lamp(s) with a multiple light source up to 1/2 not functioning (4.3.1 (a) (i))

Nearside Front Inner Tyre has a cut but not deep enough to reach the ply or cords side wall (5.2.3 (d) (i))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))

Front Registration plate does not conform to the specified requirements (0.1 (d))

Offside Front Side repeater not working (4.4.1 (a) (ii))

Rear Registration plate does not conform to the specified requirements (0.1 (d))

Central Stop lamp(s) with a multiple light source up to 1/2 not functioning (4.3.1 (a) (i))

Nearside Front Inner Tyre has a cut but not deep enough to reach the ply or cords side wall (5.2.3 (d) (i))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Headlamp aim unable to be tested (4.1.2 (b))

Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Front Upper Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Exhaust mounting defective (6.1.2 (a))

Central Upper Stop lamp(s) with a multiple light source up to 1/2 not functioning (4.3.1 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Front Registration plate does not conform to the specified requirements (0.1 (d))

Nearside Headlamp aim too low (4.1.2 (a))

Nearside Headlamp levelling device inoperative (4.1.5 (a))

Rear Registration plate does not conform to the specified requirements (0.1 (d))

Central Upper Stop lamp(s) with a multiple light source up to 1/2 not functioning (4.3.1 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Front Exhaust mounting defective (6.1.2 (a))

Nearside Rear Tyre worn close to legal limit/worn on edge worn on outer edge (5.2.3 (e))

Offside Front Track rod end ball joint has slight play (2.1.3 (b) (i))

Rear Exhaust mounting defective backbox (6.1.2 (a))

Front Brake pad(s) wearing thin (3.5.1g)

Rear Brake pad(s) wearing thin (3.5.1g)