2004 Suzuki SV1000

Central Front Suspension component pin or bush excessively worn frame to rear shock (5.3.4 (a) (i))

Offside Front Throttle operating incorrectly sticks on full lock (6.2.7 (a) (i))

Offside Rear Wheel alignment incorrect which adversely affects the handling chain alignment (2.4 (a))

Nearside Rear Drive chain so loose it is likely to fail (6.1.7 (c) (ii)) DANGEROUS

Offside Front Footrest slightly loose (6.2.12 (a))

All direction indicators flashing more than 120 times a minute (4.4.4 (a))

Front Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) DANGEROUS

Front Brake binding but not excessively (1.2.1 (f))

Central Rear Suspension arm attachment bracket/mounting insecure dog bones. (5.3.3 (a) (i))

Front Brake binding but not excessively (1.2.1 (f))

Steering movement slightly 'notchy' (2.2.1b)

Rear Roller brake test indicates a binding brake (3.3.A1a)

Registration plate insecure (6.3.1b)

Front tyre over inflated

Rear tyre under inflated

Steering movement slightly 'notchy' (2.2.1b)

Drive chain slightly loose (6.2.1d)

Exhaust is leaking but is not excessively noisey (7.1.1b)

Steering movement slightly 'notchy' (2.2.1a)

Rear Roller brake test indicates a binding brake (3.3.A1a)

Drive chain slightly loose (6.2.1d)

Exhaust is leaking but is not excessively noisey (7.1.1b)

Steering movement slightly 'notchy' (2.2.1a)

Front Tyre valve stem slightly damaged (4.1.2c)

Rear suspension bush has slight free play (2.4.A2a(i))

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Offside Front Direction indicator flashing more than 120 times per minute (1.5.1c)

Rear Rear wheel bearings have excessive free play (2.4.A.2c)

Nearside Direction indicators flashing more than 120 times per minute (1.5.1c)

Offside Direction indicators flashing more than 120 times per minute (1.5.1c)

Drive chain slightly loose (6.2.1d)

HEADRACE BEARINGS KNOTCHY IN CENTER

Rear suspension bearing has slight free play (2.4.A2a(i))

Rear Brake pad(s) (sintered type) less than 1.0mm thick (3.2A1f(ii))

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))