2006 Honda Accord

Nearside Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))

Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill and floor (6.1.1 (c) (i))

Offside Front Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))

Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Front Exhaust has a minor leak of exhaust gases flexy (6.1.2 (a))

Nearside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Headlamp has a product on the lens but not seriously reducing light output both sides (4.1.4 (b))

Front Inner Tyre worn close to legal limit/worn on edge edges (both sides) (5.2.3 (e))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front bumper damaged

Nearside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Nearside Rear arch corroded

Offside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Rear Service brake binding but not excessively (1.2.1 (f))

Oil leak, but not excessive (8.4.1 (a) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front bumper damaged

Nearside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Nearside Rear arch corroded

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Rear Service brake binding but not excessively (1.2.1 (f))

Oil leak, but not excessive (8.4.1 (a) (i))

Front Service brake fluctuating, but not excessively (1.2.1 (e))

Nearside Front Integral body structure is corroded but structural rigidity is not significantly reduced outer sill (6.1.1 (c) (i))

Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced sills inner/outer (6.1.1 (c) (i))

Offside Oil leak, but not excessive (8.4.1 (a) (i))

Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Rear Service brake fluctuating, but not excessively (1.2.1 (e))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Exhaust emissions exceed manufacturer's specified limit (8.2.2.2 (a))

Nearside Front Bumper damaged and likely to cause injury when grazed or contacted (6.1.4 (a) (i))

Nearside Front Bumper insecure (6.1.4 (a) (i))

Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt split (6.1.7 (g) (ii))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Headlamp lens seriously defective (4.1.1 (b) (ii))

Nearside Rear Body panel corroded and likely to cause injury wheel arch (6.2.1 (a) (i))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Headlamp lens seriously defective (4.1.1 (b) (ii))

Front Service brake fluctuating, but not excessively (1.2.1 (e))

Nearside Front Integral body structure is corroded but structural rigidity is not significantly reduced outer sill (6.1.1 (c) (i))

Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced sills inner/outer (6.1.1 (c) (i))

Offside Oil leak, but not excessive (8.4.1 (a) (i))

Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Rear Service brake fluctuating, but not excessively (1.2.1 (e))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Power steering component has slight seepage from a component (2.1.5 (a))

auxiliary belt worn

Items removed from driver's view prior to test ()

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Rear Service brake binding but not excessively (1.2.1 (f))

Rear Brake pad(s) wearing thin getting low (1.1.13 (a) (ii))

Nearside Headlamp light intensity severely reduced (4.1.4 (a))

Offside Headlamp aim not tested (4.1.2 (b))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Items removed from driver's view prior to test ()

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Rear Service brake binding but not excessively (1.2.1 (f))

Rear Brake pad(s) wearing thin getting low (1.1.13 (a) (ii))

Nearside Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Headlamp lens slightly defective (4.1.1 (b) (i))

Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt Split (6.1.7 (g) (ii))

Offside Front Upper Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Nearside Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Headlamp lens slightly defective (4.1.1 (b) (i))

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Front c.v.gaiter split

Offside Front Upper top ball joint locking pin missing

Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Registration plate lamp not working (1.1.C.1d)

Front registration plate margin less than the minimum requirement (6.3.4g)

Offside Stop lamp not working (1.2.1b)

Rear registration plate margin less than the minimum requirement (6.3.4g)

Child seat fitted not allowing full inspection of adult belt

Front registration plate margin less than the minimum requirement (6.3.4g)

Rear registration plate margin less than the minimum requirement (6.3.4g)

Child seat fitted not allowing full inspection of adult belt

Nearside Rear Mechanical brake component has restricted free movement (3.5.1k)

Nearside Rear rear parking (secondary) brake grabbing severely (3.7.B.6b)

Offside Front Upper Suspension arm has excessive play in a ball joint (2.4.G.2)

Offside Registration plate lamp not working (1.1.C.1d)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nail in nearside rear tyre

Nail in offside rear tyre

Nail in nearside rear tyre

Nail in offside rear tyre

Offside Headlamp aim too high (1.8)

Front Brake pad(s) wearing thin (3.5.1g)

Offside Rear Brake pad(s) wearing thin (3.5.1g)