2006 Ford Ka

Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i))

Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Service brake fluctuating, but not excessively (1.2.1 (e))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Exhaust Lambda reading after 2nd fast idle outside specified limits exhaust blow (8.2.1.2 (c))

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Service brake fluctuating, but not excessively (1.2.1 (e))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front Seat belt anchorage prescribed area is excessively corroded floor (5.2.6)

Offside Front Seat belt anchorage prescribed area is excessively corroded floor (5.2.6)

Offside Front position lamp(s) not working goes off when tapped (1.1.A.3b)

Offside Rear Front position lamp(s) not working goes off when tapped (1.1.A.3b)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front position lamp(s) not working (1.1.A.3b)

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive floor area (2.4.A.3)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

corrosion forming on offside and nearside front inner wheel arch areas

corrosion forming on offside and nearside rear inner sill areas

offside and nearside front tyres wearing on inner edge

Nearside Front coil spring broken (2.4.C.1a)

Nearside Rear coil spring broken (2.4.C.1a)

Offside Front position lamp(s) not working (1.1.A.3b)

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive floor area (2.4.A.3)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

corrosion forming on offside and nearside front inner wheel arch areas

corrosion forming on offside and nearside rear inner sill areas

offside and nearside front tyres wearing on inner edge

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Bonnet retaining device ineffective (8.4.2)

Nearside Rear position lamp(s) not working (1.1.A.3b)

Offside Headlamp not working on dipped beam (1.7.5a)

Offside Rear Trailing arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Parking brake lever has little reserve travel (3.1.6b)

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Nearside Rear position lamp(s) not working (1.1.A.3b)

Offside Rear wheel bearing rough when rotated (2.6.1)

Offside Registration plate lamp not working (1.1.C.1d)

Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone 'A' (8.3.1e)

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Items removed from driver's view prior to test

N/S/R tyre - tyre cracking 165/65 13 T

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside front brake fluctuating, but not excessively (3.7.B.3)

Offside front brake fluctuating, but not excessively (3.7.B.3)

front wiper blades slightly torn but still clearing.

rear tyres perrishing .

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Inner Front Brake pad(s) wearing thin (3.5.1g)