2004 Ford Focus C-max

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Brake cable damaged but not to excess (1.1.15 (a))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Brake pipe slightly damaged (1.1.11 (c))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Front Inner Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Windscreen wiper blade defective worn but sufficient (3.4 (b) (i))

Nearside Front Headlamp lens slightly defective (4.1.1 (b) (i))

Nearside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Front Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Front Inner Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Windscreen wiper blade defective worn but sufficient (3.4 (b) (i))

Nearside Front Headlamp lens slightly defective (4.1.1 (b) (i))

Nearside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Front Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Front Headlamp lens seriously defective (4.1.1 (b) (ii))

Offside Front Headlamp lens seriously defective (4.1.1 (b) (ii))

Nearside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge bald on inner shoulder + slightly out of shape (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge bald on inner shoulder + slightly out of shape (5.2.3 (e))

Rear exhaust bracket broken away

Nearside Front Coil spring corroded (5.3.1 (b) (i))

Nearside Front Play in steering rack inner joint(s) ()

Offside Front Coil spring corroded (5.3.1 (b) (i))

Tyre slightly damaged/cracking or perishing both rear tyres cracking and worn on inner (5.2.3 (d) (ii))

Nearside Front Outer Tyre worn close to legal limit/worn on edge worn smooth and cracking (5.2.3 (e))

Nearside Rear Inner Tyre worn close to legal limit/worn on edge worn and cracking (5.2.3 (e))

Offside Rear Inner Tyre worn close to legal limit/worn on edge worn and cracking (5.2.3 (e))

Nearside Front Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a))

Nearside Front Lower Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Offside Front Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a))

Nearside Front Outer Tyre worn close to legal limit/worn on edge worn smooth and cracking (5.2.3 (e))

Nearside Rear Inner Tyre worn close to legal limit/worn on edge worn and cracking (5.2.3 (e))

Offside Rear Inner Tyre worn close to legal limit/worn on edge worn and cracking (5.2.3 (e))

Front Headlamp deteriorated but light output not reduced both nearside and offside (1.7.5a)

Front front wipers worn but clearing screen sufficiently

Rear Anti-roll bar has slight play in a pin/bush both nearside and offside (2.4.G.2)

Rear both rear tyres have out of shape tread on inner edges

Rear ctr exhaust hanger corroded weak and rear mount has been repaired

Engine warning light on

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Offside Rear wheel bearing rough when rotated (2.6.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside rear brake binding (3.7.B.1)

Registration plate lamp not working (1.1.C.1d)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Rear Brake pad(s) wearing thin (3.5.1g)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

exhaust bracket broken

Front Brake pad(s) wearing thin (3.5.1g)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Rear Brake pad(s) wearing thin (3.5.1g)

nearside front tyre tread wearing outer edge

offside front tyre tread wearing inner edge

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Front Brake pad(s) wearing thin (3.5.1g)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Rear Brake pad(s) wearing thin (3.5.1g)

rear tyres slightly perished.

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front Tyre(s) incorrect because a lightweight or space saving wheel is fitted (4.1.A.1b)

Offside Headlamp insecure (1.7.3)

Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Rear Registration plate lamp not working (1.1.C.1d)

Nail in offside rear tyre

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)