MOT Status
ValidMileage
160,817 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Brake pad(s) wearing thin Both sides (1.1.13 (a) (ii))
Manufacture underneath trays fitted at time of test
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Rear Diff slight seepage
Front Headlamp has a product on the lens but not seriously reducing light output Both sides slight deteriorated (4.1.4 (b))
Offside Front Lower Suspension arm ball joint has slight play Rear (5.3.4 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Brake pipe corroded, covered in grease or other material both rear pipes corroded (1.1.11 (c))
Rear Coil spring corroded both rear springs corroded (5.3.1 (b) (i))
Rear Oil leak, but not excessive rear diff (8.4.1 (a) (i))
Rear Sub-frame corroded but not seriously weakened rear sub-frame and attached components corroded (5.3.3 (b) (i))
Nearside Front Play in steering rack inner joint(s)
Nearside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Nearside Rear Service brake binding but not excessively (1.2.1 (f))
Offside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Front Brake pad(s) wearing thin Both sides (1.1.13 (a) (ii))
Nearside Front Tyre has a cut but not deep enough to reach the ply or cords Outer sidewall (5.2.3 (d) (i))
Underneath trays fitted at time of test
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Exhaust system insecure (6.1.2 (a))
Nearside Front Lower Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Front Lower Suspension arm ball joint excessively worn Rear Arm (5.3.4 (a) (i))
Nearside Front Track rod end ball joint worn to the extent there is a serious risk of detachment Locking device ineffective on tie rod adjuster (2.1.3 (b) (ii)) DANGEROUS
Nearside Front Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement Front arm (5.3.4 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Inner Integral body structure is corroded but structural rigidity is not significantly reduced sill area (6.1.1 (c) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Inner Integral body structure is corroded but structural rigidity is not significantly reduced sill area (6.1.1 (c) (i))
Nearside Headlamp light intensity severely reduced (4.1.4 (a))
Nearside Side repeater not working (4.4.1 (a) (ii))
Offside Front Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Headlamp light intensity severely reduced (4.1.4 (a))
Offside Rear Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i))
Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))
Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Inner Integral body structure is corroded but structural rigidity is not significantly reduced sill area (6.1.1 (c) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Inner Integral body structure is corroded but structural rigidity is not significantly reduced sill area (6.1.1 (c) (i))
Front Service brake fluctuating, but not excessively (1.2.1 (e))
Nearside Headlamp lens slightly defective (4.1.1 (b) (i))
Offside Headlamp lens slightly defective (4.1.1 (b) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear Coil spring corroded (5.3.1 (b) (i))
Nearside Track rod end ball joint has excessive play (2.1.3 (b) (i))
Front Service brake fluctuating, but not excessively (1.2.1 (e))
Nearside Headlamp lens slightly defective (4.1.1 (b) (i))
Offside Headlamp lens slightly defective (4.1.1 (b) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear Coil spring corroded (5.3.1 (b) (i))
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
emissions to clean to read due to derv/part/filter/fitted
under trays fitted
Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
emissions to clean to read due to derv/part/filter/fitted
under trays fitted
Underneath tray fitted at time of test
Nearside Front Front position lamp(s) deteriorated, but still visible from a reasonable distance (1.1.A.3d)
Nearside Rear Anti-roll bar has slight play in a ball joint (2.4.G.2)
Nearside Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Offside Front Front position lamp(s) deteriorated, but still visible from a reasonable distance (1.1.A.3d)
Offside Rear Anti-roll bar has slight play in a ball joint (2.4.G.2)
Offside Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Engine covers fitted obscuring some components in the engine bay
Nearside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)
Under-trays fitted obscuring some underside components
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Engine covers fitted obscuring some components in the engine bay
Under-trays fitted obscuring some underside components
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Engine covers fitted obscuring some components in the engine bay
Nearside Headlamp aim too far to the right (1.8)
Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)
Under-trays fitted obscuring some underside components
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Rear Brake pad(s) wearing thin (3.5.1g)
front brake discs worn
park brake requires adjustment
slight fuel leakage from rubber pipes to pump
splits in poly v belt
Nearside Rear Lower Suspension arm has excessive play in a pin/bush (2.4.G.2)
Offside Rear Lower Suspension arm has slight play in a pin/bush (2.4.G.2)
Rear Brake pad(s) wearing thin (3.5.1g)
front brake discs worn
park brake requires adjustment
slight fuel leakage from rubber pipes to pump
splits in poly v belt
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Mercedes-benz C?
Based on 8,031,355 MOT tests across 683,668 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
KR05 VDC is a 2005 Mercedes-benz C in Silver with a 2,148cc diesel engine. This vehicle has been through 25 MOT tests with a personal pass rate of 76%.
Across all 2005 Mercedes-benz C models, the average MOT pass rate is 73.3% with a typical mileage of 83,800 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Mercedes-benz C fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 240,078 recorded failures. If you're considering buying KR05 VDC, it's worth having these areas checked by a mechanic before committing.
The Mercedes-benz C typically stays on UK roads for around 32 years. At 21 years old, this Mercedes-benz C is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of KR05 VDC?
You can check the full history of KR05 VDC by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was KR05 VDC registered?
KR05 VDC is a 2005 Mercedes-benz C, first registered on 21 June 2005.
Is KR05 VDC safe to buy?
The MOT history for KR05 VDC shows 25 tests with a 76% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does KR05 VDC have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on KR05 VDC. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.