2006 Mercedes-benz C

Brake pipe corroded, covered in grease or other material Various (1.1.11 (c))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Anti-roll bar linkage ball joint has slight play both sides (5.3.4 (a) (i))

Front Coil spring corroded both sides (5.3.1 (b) (i))

Front Lower Suspension arm ball joint has slight play both sides (5.3.4 (a) (i))

General corrosion to under-body, sub-frame and suspension components

Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Rear Coil spring corroded both sides (5.3.1 (b) (i))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Registration plate lamp insecure both sides (4.7.1 (c) (i))

Brake pipe corroded, covered in grease or other material Various (1.1.11 (c))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Anti-roll bar linkage ball joint has slight play both sides (5.3.4 (a) (i))

Front Coil spring corroded both sides (5.3.1 (b) (i))

Front Lower Suspension arm ball joint has slight play both sides (5.3.4 (a) (i))

General corrosion to under-body, sub-frame and suspension components

Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Rear Coil spring corroded both sides (5.3.1 (b) (i))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Registration plate lamp insecure both sides (4.7.1 (c) (i))

Central Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Lower Suspension arm ball joint dust cover severely deteriorated both sides (5.3.4 (b) (i))

Front Lower Suspension arm ball joint has slight play both sides (5.3.4 (a) (i))

General corrosion on under-body, sub-frame and suspension components

Offside Front Service brake fluctuating, but not excessively (1.2.1 (e))

Rear Brake pipe corroded, covered in grease or other material both sides (1.1.11 (c))

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Exhaust mounting defective (6.1.2 (a))

Front Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Rear Anti-roll bar damaged but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Emissions unable to be completed Emission significantly in excess of requirement. aborted (8.2.1.2 (d))

Exhaust catalytic converter obviously modified (8.2.1.1 (a))

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Nearside Rear Brake pipe excessively corroded (1.1.11 (c))

Offside Rear Brake pipe excessively corroded (1.1.11 (c))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Track rod end ball joint has slight play (2.1.3 (b) (i))

Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))

Nearside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Emissions unable to be completed (8.2.1.2 (d))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Nearside Brake pipe excessively corroded to flexi (1.1.11 (c))

Nearside Rear Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))

Nearside Windscreen washer not working (3.5 (a))

Offside Rear Brake pipe excessively corroded to flexi (1.1.11 (c))

Offside Windscreen washer not working (3.5 (a))

Nearside Front Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Brake pipe corroded, covered in grease or other material both corroded (1.1.11 (c))

Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

cat has been welded

surface corrosion on various rear suspension components

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Exhaust hydrocarbon content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

under trays fitted front to rear

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Service brake fluctuating, but not excessively (1.2.1 (e))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Lower Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)

Rear Brake pad(s) wearing thin (3.5.1g)

exhaust centre section brkt broken

Offside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)

Offside Headlamp aim too high (1.8)

Rear Brake pad(s) wearing thin (3.5.1g)

exhaust centre section brkt broken

Offside Headlamp aim too low and too far to the left. (1.8)

Offside Rear position lamp(s) not working (1.1.A.3b)