2002 Fiat Scudo

Nearside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Direction indicator slightly discoloured (4.4.3 (a))

Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Front Direction indicator slightly discoloured (4.4.3 (a))

Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Service brake binding but not excessively (1.2.1 (f))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Suspension rod corroded but not seriously weakened Panhard Rod (5.3.3 (b) (i))

Underside Heavily Undersealed

Exhaust emissions exceed level of metered smoke for a turbo charged engine (8.2.2.2 (b))

Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Nearside Front Service brake excessively binding (1.2.1 (f))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Cill and jacking point (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer cills (5.3.6 (a) (i))

Nearside Rear Vehicle structure excessively corroded within 30cm of towbar mounting (6.1.6 (i) (i))

Nearside Side repeater not working (4.4.1 (a) (ii))

Offside Front Brake pipe excessively corroded (1.1.11 (c))

Offside Front Brake prescribed area is excessively corroded Inner wing (1.1.21 (e) (i))

Offside Front Service brake excessively binding (1.2.1 (f))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer cills (5.3.6 (a) (i))

Offside Rear Vehicle structure excessively corroded within 30cm of towbar mounting (6.1.6 (i) (i))

Offside Side repeater not working (4.4.1 (a) (ii))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Suspension rod corroded but not seriously weakened Panhard Rod (5.3.3 (b) (i))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Nearside Front Brake hose slightly deteriorated (3.6.B.4d)

Nearside Trailing arm has slight play in a pin/bush (2.4.G.2)

Offside Trailing arm has slight play in a pin/bush (2.4.G.2)

Nearside Front front brake binding (3.7.B.1)

Nearside Headlamp aim too high (1.8)

Nearside Inner Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)

Nearside Outer Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)

Nearside Outer Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)

Nearside Trailing arm has excessive play in a pin/bush (2.4.G.2)

Offside Front Brake hose excessively deteriorated (3.6.B.4d)

Offside Front front brake binding (3.7.B.1)

Offside Headlamp aim too high (1.8)

Offside Trailing arm has excessive play in a pin/bush (2.4.G.2)

Registration plate lamp not working (1.1.C.1d)

Service brake: efficiency below requirements (3.7.B.7)

Subframe mounting prescribed area is deliberately modified which significantly reduces the original strength (2.4.A.3)

Nearside Front Brake hose slightly deteriorated (3.6.B.4d)

Nearside Front Lower Ball joint has slight play (2.2.B.1f)

Nearside Track rod end ball joint has slight play (2.2.B.1f)

Offside Track rod end ball joint has slight play (2.2.B.1f)

Power steering component(s) has slight seepage from a component (2.3.3b)

brake pipes showing signs of corrosion,

Front Exhaust has a minor leak of exhaust gases (7.1.2)

Offside and nearside front inner track rod joints have some place.

Spare wheel carrier is held up by rope but is secure.