MOT Status
ExpiredMileage
90,136 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Service brake binding but not excessively (1.2.1 (f))
Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Seat belt anchorage prescribed area is corroded but not considered excessive Floor pan/inner sill (7.1.1 (a) (i))
Offside Rear Seat belt anchorage prescribed area is corroded but not considered excessive Inner wheel arch, upper (7.1.1 (a) (i))
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Wheel arch/sill (7.1.1 (a) (i))
Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Nearside Front Service brake binding but not excessively (1.2.1 (f))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Seat belt anchorage prescribed area is corroded but not considered excessive Floor pan/inner sill (7.1.1 (a) (i))
Offside Rear Seat belt anchorage prescribed area is corroded but not considered excessive Inner wheel arch, upper (7.1.1 (a) (i))
Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Boot floor corroded/holed.
Front registration plate delaminated but not likely to be misread (6.3.1d)
Nearside Front Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Windscreen washer provides insufficient washer liquid (8.2.3)
Boot floor corroded/holed.
Front registration plate delaminated but not likely to be misread (6.3.1d)
Nearside Front Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Boot floor corroded/holed.
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside rear arch corroded, almost causing a sharp edge.
Windscreen washer provides insufficient washer liquid (8.2.3)
Boot floor corroded/holed.
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside rear arch corroded, almost causing a sharp edge.
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Front registration plate incorrect (6.3.1a)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Windscreen washer provides insufficient washer liquid (8.2.3)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Rear registration plate incorrect (6.3.1a)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1) DANGEROUS
How Reliable is the Honda S2000?
Based on 158,239 MOT tests across 9,783 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
KS03 PLJ is a 2003 Honda S2000 in Blue with a 1,997cc petrol engine. This vehicle has been through 17 MOT tests with a personal pass rate of 70.6%.
Across all 2003 Honda S2000 models, the average MOT pass rate is 80.5% with a typical mileage of 60,425 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Honda S2000 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 6,528 recorded failures. If you're considering buying KS03 PLJ, it's worth having these areas checked by a mechanic before committing.
The Honda S2000 typically stays on UK roads for around 27 years. At 23 years old, this Honda S2000 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of KS03 PLJ?
You can check the full history of KS03 PLJ by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was KS03 PLJ registered?
KS03 PLJ is a 2003 Honda S2000, first registered on 20 June 2003.
Is KS03 PLJ safe to buy?
The MOT history for KS03 PLJ shows 17 tests with a 70.6% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does KS03 PLJ have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on KS03 PLJ. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.