2003 Fiat Seicento

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sills (5.3.6 (a) (i))

Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))

Rear Service brake excessively fluctuating both sides (1.2.1 (e))

Front Macpherson strut corroded but not seriously weakened both sides (5.3.3 (b) (i))

Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced inner sill, jacking point (6.1.1 (c) (i))

Rear Brake hose has slight corrosion to ferrule both sides (1.1.12 (f) (i))

Rear Brake pipe corroded, covered in grease or other material both sides (1.1.11 (c))

Rear Coil spring corroded both sides (5.3.1 (b) (i))

Rear Integral body structure is corroded but structural rigidity is not significantly reduced both sides (6.1.1 (c) (i))

Rear Lower Suspension arm corroded but not seriously weakened both sides (5.3.3 (b) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear Shock absorbers has slight external damage to the casing both are corroded (5.3.2 (b))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Front Outer Drive shaft joint constant velocity boot severely deteriorated Perished (6.1.7 (g) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Service brake fluctuating, but not excessively (1.2.1 (e))

Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced Inner Wheel Arch (6.1.1 (c) (i))

Offside Front Outer Drive shaft joint constant velocity boot severely deteriorated Perished (6.1.7 (g) (i))

Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced Inner Sill (6.1.1 (c) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Service brake fluctuating, but not excessively (1.2.1 (e))

Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced Inner Sill (6.1.1 (c) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Headlamp aim too low (4.1.2 (a))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside rear brake binding (3.7.B.1)

Offside rear brake binding (3.7.B.1)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Brakes imbalanced across an axle (3.7.B.5b)

Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

front brake application uneven (3.7.B.2)

Nail in nearside front tyre

Nearside Rear reflector not red in colour (1.5.1d)