2003 Mercedes-benz C

Parking brake efficiency only just met. it would appear that the braking system requires adjustment or repair.

Suspension component mounting prescribed area is corroded but not considered excessive offside nearside (front and rear) (5.3.6 (a) (i))

Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement inner (5.3.4 (a) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive n/s and o/s (5.3.6 (a) (i))

Engine Covers and Under Trays Fitted Not Allowing Full Inspection Of Components.

Front Inner Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear Suspension component corroded but not seriously weakened (5.3.3 (b) (i))

Front Suspension component pin or bush slightly worn offside nearside (5.3.4 (a) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Front Suspension arm pin or bush worn but not resulting in excessive movement n.s & o.s (5.3.4 (a) (i))

underbody has slight corrosion

unertrays fitted

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Exhaust hydrocarbon content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Nearside Front Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Front coil spring slightly weak

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)

Nearside Front Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Front coil spring slightly weak

Rear Brake pad(s) wearing thin both side (3.5.1g)

engine cover fitted both side

Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)

Rear Brake pad(s) wearing thin both side (3.5.1g)

engine cover fitted both side

Engine covers fitted obscuring some components in the engine bay

Nearside Front Upper Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Under-trays fitted obscuring some underside components

rear centre exhaust mounting slightly corroded

rear exhaust mount corroded

Front Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Rear Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

front brake juddering severely (3.7.A.2b)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear coil spring incomplete (2.4.C.1a)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Track rod end ball joint has excessive play (2.2.B.1f)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)