MOT Status
ExpiredMileage
92,295 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Central Rear Stop lamp(s) non-obligatory stop lamp not working (4.3.1 (a) (ii))
Nearside Outer Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Rear Shock absorbers has light misting of oil (5.3.2 (b))
Offside Outer Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Emissions unable to be completed Due to excessive oil leak and lack of oil in engine (8.2.1.2 (d))
Oil leaking excessively from engine (8.4.1 (a) (i))
Offside Front Anti-roll bar linkage missing (5.3.3 (a) (ii)) DANGEROUS
Central Rear Stop lamp(s) non-obligatory stop lamp not working (4.3.1 (a) (ii))
Nearside Outer Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Rear Shock absorbers has light misting of oil (5.3.2 (b))
Offside Outer Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Nearside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Nearside Outer Integral body structure is corroded but structural rigidity is not significantly reduced Sill (6.1.1 (c) (i))
Nearside Rear Shock absorbers has light misting of oil (5.3.2 (b))
Offside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Offside Outer Integral body structure is corroded but structural rigidity is not significantly reduced Sill (6.1.1 (c) (i))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Oil leak, but not excessive Forming drips onto floor (8.4.1 (a) (i))
Power steering component has slight seepage from a component (2.1.5 (a))
Nearside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))
Offside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))
Offside Front Anti-roll bar linkage missing (5.3.3 (a) (ii)) DANGEROUS
Nearside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Nearside Front Windscreen wiper blade defective (3.4 (b) (i))
Nearside Outer Integral body structure is corroded but structural rigidity is not significantly reduced Sill (6.1.1 (c) (i))
Nearside Rear Shock absorbers has light misting of oil (5.3.2 (b))
Offside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Offside Front Windscreen wiper blade defective (3.4 (b) (i))
Offside Outer Integral body structure is corroded but structural rigidity is not significantly reduced Sill (6.1.1 (c) (i))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Oil leak, but not excessive Forming drips onto floor (8.4.1 (a) (i))
Power steering component has slight seepage from a component (2.1.5 (a))
Nearside Front Headlamp has a product on the lens but not seriously reducing light output Faded beam image (4.1.4 (b))
Nearside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))
Offside Outer Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Offside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))
Oil leak, but not excessive (8.4.1 (a) (i))
Power steering component has slight seepage from a component (2.1.5 (a))
Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))
Electronic stability control warning lamp indicates a fault (7.12 (e))
Offside Front Inner Suspension rod pin or bush excessively worn (rear) bush detached from bonding (5.3.4 (a) (i))
Nearside Front Headlamp has a product on the lens but not seriously reducing light output Faded beam image (4.1.4 (b))
Nearside Rear Nail in tyre ()
Nearside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))
Nearside Rear Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Outer Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Offside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))
Oil leak, but not excessive (8.4.1 (a) (i))
Power steering component has slight seepage from a component (2.1.5 (a))
Offside Front Inner Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Rear Exhaust mounting defective (6.1.2 (a))
Nearside Front brake binding slightly
Nearside Lower Front suspension ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
exhaust bracket broken
Rear exhaust mountings detached.
Rear Brake pad(s) wearing thin (3.5.1g)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Nearside Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Inner Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front Lower Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Lower Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
both front tyres worn on inner edges
offside front brake binding slightly
Nearside Headlamp aim too low (1.8)
Offside Front Lower Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Headlamp aim too low (1.8)
Offside Rear Tyre has a tear, caused by separation or partial failure of its structure (4.1.D.1b)
Nearside Front Lower Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Lower Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
both front tyres worn on inner edges
offside front brake binding slightly
Play in steering rack inner joint(s)
handbrake adjustment long
rear fog light damaged and slightly out of position
front pads 2mm thickness
rear brakes binding
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)
front pads 2mm thickness
rear brakes binding
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Brake pad(s) wearing thin (3.5.1g)
Offside Front Brake pad(s) wearing thin (3.5.1g)
How Reliable is the Chrysler Pt Cruiser?
Based on 279,642 MOT tests across 18,504 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
KS56 BUW is a 2006 Chrysler Pt Cruiser in Red with a 2,429cc petrol engine. This vehicle has been through 21 MOT tests with a personal pass rate of 71.4%.
Across all 2006 Chrysler Pt Cruiser models, the average MOT pass rate is 68.9% with a typical mileage of 55,779 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Chrysler Pt Cruiser fails its MOT is suspension arm rubber bush deteriorated resulting in excessive movement, accounting for 18,061 recorded failures. If you're considering buying KS56 BUW, it's worth having these areas checked by a mechanic before committing.
The Chrysler Pt Cruiser typically stays on UK roads for around 26 years. At 20 years old, this Chrysler Pt Cruiser is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of KS56 BUW?
You can check the full history of KS56 BUW by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was KS56 BUW registered?
KS56 BUW is a 2006 Chrysler Pt Cruiser, first registered on 30 November 2006.
Is KS56 BUW safe to buy?
The MOT history for KS56 BUW shows 21 tests with a 71.4% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does KS56 BUW have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on KS56 BUW. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.