2009 Fiat 500

centre to rear exhaust corroded .........

front brake discs worn .......

o/s/f tyre worn inner edge .......

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Front Macpherson strut top bush or bearing has excessive wear or free play (5.3.4 (a) (i))

centre to rear exhaust corroded .........

front brake discs worn .......

o/s/f tyre worn inner edge .......

Front Exhaust has a minor leak of exhaust gases Joint (6.1.2 (a))

Nearside Headlamp aim unable to be tested (4.1.2 (b))

Nearside Headlamp lens seriously defective (4.1.1 (b) (ii))

Offside Headlamp aim unable to be tested (4.1.2 (b))

Offside Headlamp lens seriously defective (4.1.1 (b) (ii))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Front Exhaust has a minor leak of exhaust gases Joint (6.1.2 (a))

both front inner sidewall on tyre poor- change soon

front top mount slightly noisy when turning

n/s/f tyre low on edges

o/s/f shocker damp

o/s/f tyre wearing low on edges

Nearside Front Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Rear Rear fog lamp not working (4.5.1 (a) (ii))

Parking brake efficiency below requirements (1.4.2 (a) (i))

both front inner sidewall on tyre poor- change soon

front top mount slightly noisy when turning

n/s/f tyre low on edges

o/s/f shocker damp

o/s/f tyre wearing low on edges

Parking brake efficiency below requirements (1.4.2 (a) (i))

Registration plate lamp inoperative in the case of a single lamp or all lamps both lights not working (4.7.1 (b) (ii))

hand brake lever high

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Rear suspension bump stop insecure

Rear suspension beam corroded

Nearside Front Outer Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Rear suspension bump stop insecure

Rear suspension beam corroded

Central Stop lamp(s) not working (4.3.1 (a) (ii))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Front Exhaust has a minor leak of exhaust gases joint (6.1.2 (a))

Rear Exhaust has a minor leak of exhaust gases joint (6.1.2 (a))

Central Stop lamp(s) non-obligatory stop lamp not working (4.3.1 (a) (ii))

Exhaust has a minor leak of exhaust gases at front joint and joint to back box (6.1.2 (a))

Front Exhaust mounting defective mounting heavily corroded (6.1.2 (a))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bush perished and bonding failing (5.3.4 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bush perished and bonding started to fail (5.3.4 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge worn on inner and outer edges bald almost to chord on inner edge!! (5.2.3 (e))

Nearside Front Shock absorbers has a serious fluid leak (5.3.2 (b))

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Central Stop lamp(s) non-obligatory stop lamp not working (4.3.1 (a) (ii))

Exhaust has a minor leak of exhaust gases at front joint and joint to back box (6.1.2 (a))

Front Exhaust mounting defective mounting heavily corroded (6.1.2 (a))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bush perished and bonding failing (5.3.4 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bush perished and bonding started to fail (5.3.4 (a) (i))

Offside Front Tyre obviously under inflated (5.2.3 (h) (i))

Offside Front Tyre worn close to legal limit/worn on edge worn on inner and outer edges bald almost to chord on inner edge!! (5.2.3 (e))

Front registration plate character(s) incorrectly spaced (6.3.4a)

Rear registration plate character(s) incorrectly spaced (6.3.4a)

Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Rear Registration plate lamp not working (1.1.C.1d)

Offside Rear Registration plate lamp not working (1.1.C.1d)

advise nsf pads look to be getting low