2006 Mercedes-benz C

Central Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Exhaust carbon monoxide content at idle exceeds manufacturer's specified limits (8.2.1.2 (b))

Front Anti-roll bar mounting has an unsafe modification (5.3.3 (c) (i))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Headlamp aim unable to be tested (4.1.2 (b))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Service brake efficiency below requirements (1.2.2 (a) (i))

Windscreen washer not working both (3.5 (a))

Nearside Rear Brake pad(s) incorrectly mounted (1.1.13 (c)) DANGEROUS

Offside Rear Brake pad(s) incorrectly mounted (1.1.13 (c)) DANGEROUS

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Headlamp aim unable to be tested Due to O/S (4.1.2 (b))

Nearside Front Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Front Lower Suspension arm ball joint excessively worn Foremost arm/ marked with chalk (5.3.4 (a) (i))

Offside Front Upper Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Rear Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS

Central Front Oil leak, but not excessive (8.4.1 (a) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Brake pad(s) wearing thin inner pads (1.1.13 (a) (ii))

all rear suspension components and subframe rusty

Nearside Front Suspension arm ball joint has slight play rear of pair (5.3.4 (a) (i))

Offside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Lower Suspension arm ball joint excessively worn REAR OF PAIR (5.3.4 (a) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Suspension arm ball joint has slight play REAR OF PAIR (5.3.4 (a) (i))

Nearside Brake pipe excessively corroded FRONT TO REAR (1.1.11 (c))

Offside Brake pipe excessively corroded FRONT TO REAR (1.1.11 (c))

Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Front Suspension arm ball joint has slight play REAR OF PAIR (5.3.4 (a) (i))

Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

rear metal brake pipes corroded slightly

Nearside Front Wheel bearing has excessive play (5.1.3 (a) (i))

Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Rear Anti-roll bar pin or bush worn but not resulting in excessive movement slight movement (5.3.4 (a) (i))

Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Rear Brake hose slightly deteriorated (1.1.12 (b) (ii))

Exhaust system corroded centre to rear

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement Front arm (5.3.4 (a) (i))

Central Exhaust has a minor leak of exhaust gases (7.1.2)

Offside Front Outer Radius arm has slight play in a ball joint (2.4.G.2)

Nearside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)

Parking brake: efficiency below requirements (3.7.B.7)

o/s/r tyre low inner edge

one exhaust mount broken off.

Engine covers fitted obscuring some components in the engine bay

Under-trays fitted obscuring some underside components

Offside Front Track rod end ball joint has excessive play (2.2.B.1f)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Engine covers fitted obscuring some components in the engine bay

Under-trays fitted obscuring some underside components

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nail in nearside rear tyre