2007 Honda Anf

Drive chain excessively loose (6.2.1d)

Drive chain sprocket carrier worn to excess (6.2.1e)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Headlamp insecure (1.2.3b)

Horn is not a constant note (1.7.3c)

Rear Brake lining(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride (6.2.1h)

Rear Tyre is incorrectly seated on the wheel rim (4.1.2b)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear shock absorber has inadequate damping effect. (2.4.A.3b)

Stop lamp affected by the operation of another lamp (1.3.2)

Chain guard missing

Front Wheel alignment slightly misaligned. (2.5.1)

no rear foofpegs

outer barend missing

Drive chain slightly loose (6.2.1d)

Front Wheel has a slightly distorted bead rim. (4.2.2)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Rear Wheel has a slightly distorted bead rim. (4.2.2)

Steering headbearing has slight free play (2.2.2)

Drive chain worn to excess (6.2.1e)

Fairing insecure and likely to impede the steering (2.1.2e)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Front suspension assembly component excessively bent (2.3.1)

Headlamp insecure (1.2.3b)

Rear Direction indicator affected by the operation of another lamp (1.5.1c)

Rear Drive chain sprocket worn to excess (6.2.1e)

Front Wheel has a slightly distorted bead rim. (4.2.2)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Rear Wheel has a slightly distorted bead rim. (4.2.2)

Steering headbearing has slight free play (2.2.2)

Front Brake disc(s) has excessive run out (3.2.A1m)

Front Wheel spoke excessively loose (4.2.1b)

Front position lamp does not illuminate immediately when switched on (1.1.3a)

Front suspension has inadequate damping effect. (2.3.6c)

Rear shock absorber has inadequate damping effect. (2.4.A.3b) DANGEROUS

Drive chain excessively loose (6.2.1d) DANGEROUS

Fairings insecure and likely to impede the steering (2.1.2e) DANGEROUS

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii)) DANGEROUS

Rear Brake reaction bracket securing bolt(s) loose (3.2.A1j) DANGEROUS

Rear Rear shock absorber has inadequate damping effect. (2.4.A.3b) DANGEROUS

Rear Tyre is incorrectly seated on the wheel rim (4.1.2b) DANGEROUS

Front Brake disc(s) slightly worn (3.2.A1l)

Rear Drive chain sprocket slightly worn (6.2.1e)

Front Brake pad(s) (sintered type) less than 1.0mm thick (3.2A1f(ii))

Front Roller brake test indicates a binding brake (3.3.A1a)

Front Wheel has an excessively distorted bead rim. (4.2.2)

Front wheel bearings have excessive free play (2.3.5b)

Front Tyre worn close to the legal limit (4.1.3(ii))

Rear Roller brake test indicates a slightly grabbing brake (3.3.A1b)

pizza box rack securing bolt missing