2019 Sinnis Rsx 125

Brake pedal is bent but brake can still be readily applied Foot brake lever bent (1.1.2 (d))

Clutch lever loose / insecure

Foot gear linkage worn loose

Rear Registration plate lamp throwing direct white light to the rear (4.7.1 (a))

Drive chain excessively tight (6.1.7 (k) (i))

Front Tyre is unsuitable (5.2.3 (a))

Headlamp aim too high (4.1.2 (a))

Nearside Front Direction indicator slightly affected by the operation of another lamp (4.4.3 (b))

Nearside Rear Direction indicator with a multiple light source up to 1/2 not functioning (4.4.1 (a) (i))

Headlamp aim too high (4.1.2 (a))

Nearside Rear Footrest missing (6.2.12 (a))

Offside Rear Footrest missing (6.2.12 (a))

Steering headbearing has excessive wear or free play (2.2.2 (f) (i))

Front Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Rear Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Nearside Front Direction indicator slightly affected by the operation of another lamp (4.4.3 (b))

Nearside Rear Direction indicator with a multiple light source up to 1/2 not functioning (4.4.1 (a) (i))

Riders seat insecure (6.2.5 (a) (ii))

Rear Drive chain sprocket worn to excess (6.1.7 (c) (i))

Drive chain so loose it is likely to fail (6.1.7 (c) (ii)) DANGEROUS

Drive chain so worn it is likely to fail (6.1.7 (c) (ii)) DANGEROUS

Exhaust slightly loose Outer exhaust shielding cover loose (6.1.2 (a))

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Front Tyre worn close to the legal limit Advise tyre low tread / stepping NEAR FAIL (5.2.3 (e))

Rear Advise both rear foot rests missing at time of test

Rear Tyre worn close to the legal limit (5.2.3 (e))

Headlamp aim too low (4.1.2 (a))

Nearside Rear Footrest missing (6.2.12 (a))

Offside Rear Footrest missing (6.2.12 (a))

Rear Brake excessively binding (1.2.1 (f))

Rear Suspension arm attachment bracket/mounting insecure Swinging arm bearings (5.3.3 (a) (i))

Rear reflector missing (4.8.2 (a) (ii))

Wheel alignment slightly misaligned (2.4 (a))

Rear reflector missing (4.8.2 (a) (ii))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Stop lamp not working Stop lamp not working when front brake is applied (4.3.1 (a) (ii))

Front Brake pad(s) less than 1.0 mm thick (1.1.13 (a)) DANGEROUS