2006 Seat Alhambra

Front Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Nearside Front Suspension arm damaged but not seriously weakened (5.3.3 (b) (i))

Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Front Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Exhaust hydrocarbon content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Exhaust emissions likely to be affected by an exhaust leak rear silencer (8.2.1.1 (b))

Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Nearside Front Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front and rear outer sill (5.3.6 (a) (i))

Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Nearside Front Inner wheel arch corroded

various brake pipes corroded

Exhaust hydrocarbon content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Nearside Parking brake inoperative on one side (1.4.1 (a))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Front Tyre worn close to legal limit/worn on edge BOTH FRONT TYRES (5.2.3 (e))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Coil spring fractured or broken (5.3.1 (b) (i))

Offside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Front tyre worn on edge

Nearside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Nearside Front tyre worn on edge

Offside Front Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)

Offside Front Shock absorber has a slightly worn bush (2.7.4)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Shock absorber has a light misting of oil (2.7.3)

Parking brake: efficiency below requirements (3.7.B.7)

Centre exhaust corroded and bracket adrift

Nearside Rear Shock absorber has a serious fluid leak (2.7.3)

Offside Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Front drive shaft coupling is slightly worn (2.5.C.1c)

Offside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

rear exhaust clamp missing

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Headlamp not working on dipped beam (1.7.5a)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Front Brake pad(s) wearing thin (3.5.1g)

Rear Brake pad(s) wearing thin (3.5.1g)

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Front constant velocity joint is insecure (2.5.C.1b)

Nearside Headlamp aim too low (1.8)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Front Tyre worn close to the legal limit (4.1.E.1)

Exhaust system not adequately supported (7.1.1)

Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front constant velocity joint gaiter insecurely mounted to its housing (2.5.C.1a)

Windscreen has a sticker or other obstruction encroaching by more than 10mm within zone 'A' (8.3.1b)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Front constant velocity joint gaiter insecurely mounted to its housing (2.5.C.1a)

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Rear Brake pad(s) wearing thin (3.5.1g)