2016 Peugeot 208

Front Brake disc worn, pitted or scored, but not seriously weakened both sides (1.1.14 (a) (ii))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened both sides badly worn (1.1.14 (a) (ii))

Front Brake pad(s) wearing thin both sides worn very close to legal limit of 1.5 mm (1.1.13 (a) (ii))

Front Gearbox mounting defective

Front Items removed from driver's view prior to test from mirror

Front Oil leak, but not excessive (8.4.1 (a) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive at top of coil spring area (5.3.6 (a) (i))

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive at top of coil spring area (5.3.6 (a) (i))

Rear Brake hose has slight corrosion to ferrule both sides (1.1.12 (f) (i))

Rear Tyre slightly damaged/cracking or perishing both rear tires cracking - tire size = 185-65-15 (5.2.3 (d) (ii))

Emissions unable to be completed due to major exhaust leak from manifold to catalytic convertor (8.2.1.2 (d))

Front Exhaust has a major leak of exhaust gases (6.1.2 (a))

Front Brake disc worn, pitted or scored, but not seriously weakened both sides badly worn (1.1.14 (a) (ii))

Front Brake pad(s) wearing thin both sides worn very close to legal limit of 1.5 mm (1.1.13 (a) (ii))

Front Gearbox mounting defective

Front Items removed from driver's view prior to test from mirror

Front Oil leak, but not excessive (8.4.1 (a) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive at top of coil spring area (5.3.6 (a) (i))

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive at top of coil spring area (5.3.6 (a) (i))

Rear Brake hose has slight corrosion to ferrule both sides (1.1.12 (f) (i))

Rear Tyre slightly damaged/cracking or perishing both rear tires cracking - tire size = 185-65-15 (5.2.3 (d) (ii))

Oil leak, but not excessive (8.4.1 (a) (i))

Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Suspension arm pin or bush excessively worn rear wishbone bush (5.3.4 (a) (i))

Offside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush excessively worn rear wishbone bush (5.3.4 (a) (i))

Offside Parking brake inoperative on one side (1.4.1 (a))

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Oil leak, but not excessive (8.4.1 (a) (i))

Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Offside Rear Service brake binding but not excessively (1.2.1 (f))

Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))

Front Tyre slightly damaged/cracking or perishing both front tyres cracked on sidewall (5.2.3 (d) (ii))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Nearside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Exhaust has a minor leak of exhaust gases multiple (6.1.2 (a))

Front Tyre slightly damaged/cracking or perishing both front tyres cracked on sidewall (5.2.3 (d) (ii))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Tyre worn close to legal limit/worn on edge on 2mm (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge on 2mm (5.2.3 (e))