2002 Honda C90

Nearside Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Offside Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Drive chain excessively loose (6.2.1d)

Exhaust mounting does not fully support the exhaust system (7.1.1.c)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Front suspension has inadequate damping effect. (2.3.6c)

Rear shock absorber seal failed and leaking oil (2.4.A.1c)

Roller brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.A2b)

Exhaust mounting deteriorated. (7.1.1.c)

Exhaust slightly deteriorated (7.1.1a)

Fairings insecure but not likely to impede the steering (2.1.2e)

Front position lamp does not illuminate immediately when switched on (1.1.3a)

Nearside Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Offside Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Exhaust mounting deteriorated. (7.1.1.c)

Exhaust slightly deteriorated (7.1.1a)

Fairings insecure but not likely to impede the steering (2.1.2e)

Nearside Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Offside Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Front Tyre worn close to the legal limit (4.1.3(ii))

Rear Tyre worn close to the legal limit (4.1.3(ii))

Rear Registration plate dirty (6.3.1d)

Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Drive chain excessively loose (6.2.1d)

Exhaust is leaking and excessively noisey (7.1.1b)

Front Brake lever is bent and the brake cannot be readily applied (3.1.3c)

Front Front mudguard insecure (2.3.7)

Headlamp aim too high (1.6)

Nearside Direction indicator incorrect colour (1.5.1b)

Offside Direction indicator incorrect colour (1.5.1b)

Rear Brake lining(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Steering movement slightly 'notchy' (2.2.1a)

Brake lever is bent and the brake cannot be readily applied (3.1.3c)

Drive chain excessively loose (6.2.1d)

Drive chain fouling another component (6.2.1d)

Exhaust is leaking and excessively noisey (7.1.1b)

Floor brake test No brake control achieves an efficiency of 30%. (3.3.C1a)

Front Front mudguard can easily contact the tyre (2.3.7)

Front Front mudguard insecure (2.3.7)

Front suspension assembly excessive wear or free play in a front suspension component (2.3.4)

Nearside Front Direction indicator incorrect colour (1.5.1b)

Nearside Front Footrest insecure (6.2.1a)

Offside Front Direction indicator incorrect colour (1.5.1b)

Offside Front Footrest insecure (6.2.1a)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Nearside Front Direction indicator damaged but function not impaired (1.5.3a)

Offside Front Direction indicator damaged but function not impaired (1.5.3a)

Front suspension has excessive stiffness in the suspension movement. (2.3.6b)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Rear position lamp insecure (1.1.1c)

Steering control handlebar movement restricted by trapped cables (2.1.2c)