MOT Status
ExpiredMileage
81,635 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Offside Front Position lamp light intensity obviously reduced (4.2.3 (a) (i))
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
Brake hydraulic reservoir fluid level significantly below minimum level (1.1.10 (d) (ii))
Brake performance unable to be tested (1.2.1 (g))
Front Windscreen washer not working (3.5 (a))
Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Nearside Front Lower Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))
Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Front Lower Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))
Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Offside Front Tyre tread depth below requirements of 1.6mm 165-65-13 (5.2.3 (e)) DANGEROUS
Offside Front Position lamp light intensity obviously reduced (4.2.3 (a) (i))
Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
age related corrosion to underside
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Nearside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm (5.3.4 (a) (i))
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Headlamp aim too low (4.1.2 (a))
Nearside Headlamp levelling device inoperative (4.1.5 (a))
Offside Headlamp aim too low (4.1.2 (a))
Offside Headlamp levelling device inoperative (4.1.5 (a))
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i))
Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Rear Suspension arm pin or bush excessively worn trailing arm (5.3.4 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear part of inner arch (5.3.6 (a) (i))
Central Stop lamp(s) with a multiple light source up to 1/2 not functioning (4.3.1 (a) (i))
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Nearside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm (5.3.4 (a) (i))
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive sill/wheel arch (5.3.6 (a) (i))
Offside Headlamp aim too low (4.1.2 (a))
Offside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive sill/wheel arch (5.3.6 (a) (i))
Nearside Front Front position lamp(s) missing (1.1.A.3a)
Nearside Front coil spring broken (2.4.C.1a)
Nearside Registration plate lamp not working (1.1.C.1d)
Offside Front coil spring broken (2.4.C.1a)
Nearside Rear position lamp(s) not working (1.1.A.3b)
Offside Registration plate lamp not working (1.1.C.1d)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Headlamp aim too low (1.8)
Offside Rear Rear position lamp(s) not working (1.1.A.3b)
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
KU06 EPN is a 2006 Ford Ka in Black with a 1,297cc petrol engine. This vehicle has been through 21 MOT tests with a personal pass rate of 61.9%.
Across all 2006 Ford Ka models, the average MOT pass rate is 69.7% with a typical mileage of 42,791 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying KU06 EPN, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 20 years old, this Ford Ka is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of KU06 EPN?
You can check the full history of KU06 EPN by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was KU06 EPN registered?
KU06 EPN is a 2006 Ford Ka, first registered on 27 May 2006.
Is KU06 EPN safe to buy?
The MOT history for KU06 EPN shows 21 tests with a 61.9% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does KU06 EPN have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on KU06 EPN. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.