2006 Mercedes-benz Vito

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Nearside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Offside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Rear Position lamp not working (4.2.1 (a) (ii))

Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Windscreen washer not working (3.5 (a))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Nearside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Offside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Front Oil leak, but not excessive (8.4.1 (a) (i))

Front Track rod end ball joint has slight play both sides (2.1.3 (b) (i))

Nearside Front Upper Macpherson strut pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Inner Integral body structure is corroded but structural rigidity is not significantly reduced sill next to jacking point (6.1.1 (c) (i))

Rear Oil leak, but not excessive (8.4.1 (a) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive both outer sills (5.3.6 (a) (i))

Emissions unable to be completed due to major exhaust leak (8.2.2.2 (e))

Exhaust has a major leak of exhaust gases x2 places as marked (6.1.2 (a))

Nearside Rear Parking brake inoperative on one side (1.4.1 (a))

Nearside Rear Road wheel fixing missing (5.2.1 (a) (i))

Offside Rear Parking brake inoperative on one side (1.4.1 (a))

Nearside Front Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS

Offside Front Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS

Offside Rear Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Front Oil leak, but not excessive (8.4.1 (a) (i))

Front Track rod end ball joint has slight play both sides (2.1.3 (b) (i))

Nearside Front Upper Macpherson strut pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Inner Integral body structure is corroded but structural rigidity is not significantly reduced sill next to jacking point (6.1.1 (c) (i))

Rear Oil leak, but not excessive (8.4.1 (a) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive both outer sills (5.3.6 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge inner edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge inner edge (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge inner edge (5.2.3 (e))

Nearside Headlamp light intensity severely reduced (4.1.4 (a))

Offside Headlamp light intensity severely reduced (4.1.4 (a))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge inner edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge inner edge (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge inner edge (5.2.3 (e))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

both headlamp lenses faded

slight blow in rear exhaust

slight blow in rear exhaust

Front Service brake binding but not excessively (1.2.1 (f))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Brake pipe excessively corroded 2x longitudinal (3.6.B.2c)

Front brake disc in such a condition that it is seriously weakened (3.5.1i)

Nearside Front front brake binding (3.7.B.1)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside Front Brake pipe excessively corroded (3.6.B.2c)

Offside Headlamp not working on dipped beam (1.7.5a)

Offside Rear Coil spring not correctly located (2.4.C.2)

Offside Track rod end loose (2.2.B.1d)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Registration plate lamp not working (1.1.C.1d)

registration plate deteriorated front and rear (6.3.1d)

Parking brake lever has little reserve travel (3.1.6b)

Offside Brake pipe excessively corroded (3.6.B.2c)

brake disc in such a condition that it is seriously weakened (3.5.1i)

Parking brake lever has little reserve travel (3.1.6b)

Rear Brake pad(s) wearing thin (3.5.1g)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)