MOT Status
ValidMileage
178,484 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Integral body structure is corroded but structural rigidity is not significantly reduced underside of vehicle corroded (6.1.1 (c) (i))
Nearside Front Track rod end ball joint has slight play (2.1.3 (b) (i))
Offside Front Play in steering rack inner joint(s) ()
Exhaust has a major leak of exhaust gases CENTRE TO BACKBOX (6.1.2 (a))
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength SILL HOLED (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength SILL HOLED (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength INNER ARCH/SILL HOLED (5.3.6 (a) (i))
Integral body structure is corroded but structural rigidity is not significantly reduced underside of vehicle corroded (6.1.1 (c) (i))
Nearside Front Track rod end ball joint has slight play (2.1.3 (b) (i))
Offside Front Play in steering rack inner joint(s) ()
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Suspension component corroded but not seriously weakened ALL REAR COMPONENTS HAVE CORROSION (5.3.3 (b) (i))
Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))
Offside Front Tyre worn close to legal limit/worn on edge WORN ON EDGE (5.2.3 (e))
Rear Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Exhaust has a major leak of exhaust gases AT BACK BOX (6.1.2 (a))
Nearside Rear Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))
Nearside Rear Coil spring fractured or broken (5.3.1 (b) (i))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))
Parking brake lever inoperative (1.1.6 (d))
Rear Parking brake inoperative on one side OSR AND NSR (1.4.1 (a))
Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS
Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))
Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge AT 2MM (5.2.3 (e))
Offside Front Tyre worn close to legal limit/worn on edge WORN ON EDGE (5.2.3 (e))
Rear Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Nearside Parking brake inoperative on one side (1.4.1 (a))
Nearside Rear Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Offside Front Service brake excessively binding (1.2.1 (f))
Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS
Offside Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Windscreen washer provides insufficient washer liquid (3.5 (a))
Central Exhaust shield missing where fitted as original equipment creating a risk of fire (6.1.3 (e)) DANGEROUS
Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Rear Seat belt not functioning as intended (7.1.2 (c))
Nearside Rear Inner Tyre has ply or cords damaged (5.2.3 (d) (ii)) DANGEROUS
Offside Front Tyre has a tear, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS
Offside Rear Inner Tyre has ply or cords damaged (5.2.3 (d) (ii)) DANGEROUS
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Windscreen washer jets misaligned and not providing sufficient fluid to the windscreen (3.5 (a))
Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Front brake disc in such a condition that it is seriously weakened (3.5.1i)
Nearside Rear Trailing arm rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)
Nearside front brake excessively fluctuating (3.7.B.3)
Offside Front brake disc in such a condition that it is seriously weakened (3.5.1i)
Offside Rear Trailing arm rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)
Offside front brake excessively fluctuating (3.7.B.3)
Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Registration plate lamp not working (1.1.C.1d)
Rear Exhaust has a major leak of exhaust gases (7.1.2)
Windscreen washer provides insufficient washer liquid (8.2.3)
Registration plate lamp not working (1.1.C.1d)
How Reliable is the Ford S-max?
Based on 1,368,227 MOT tests across 101,843 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
KU10 CJZ is a 2010 Ford S-max in White with a 1,997cc diesel engine. This vehicle has been through 24 MOT tests with a personal pass rate of 58.3%.
Across all 2010 Ford S-max models, the average MOT pass rate is 74.2% with a typical mileage of 83,408 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford S-max fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 26,089 recorded failures. If you're considering buying KU10 CJZ, it's worth having these areas checked by a mechanic before committing.
The Ford S-max typically stays on UK roads for around 20 years. At 16 years old, this Ford S-max is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of KU10 CJZ?
You can check the full history of KU10 CJZ by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was KU10 CJZ registered?
KU10 CJZ is a 2010 Ford S-max, first registered on 3 March 2010.
Is KU10 CJZ safe to buy?
The MOT history for KU10 CJZ shows 24 tests with a 58.3% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does KU10 CJZ have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on KU10 CJZ. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.