2013 Peugeot 208

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Central Rear exhaust heat shield loose.

Nearside Front tyre starting to wear on outer edge.

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front tyre starting to scrub on edges.

Bonnet cannot be secured in the closed position (3.1 (b) (i))

Engine MIL inoperative or indicates a malfunction (8.2.2.2 (g))

Nearside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))

Offside Rear Parking brake inoperative on one side (1.4.1 (a))

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Central Rear exhaust heat shield loose.

Nearside Front tyre starting to wear on outer edge.

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front tyre starting to scrub on edges.

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Front Headlamp reflector seriously defective (4.1.1 (b) (ii))

Nearside Headlamp aim too low (4.1.2 (a))

Offside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))

Offside Front Service brake fluctuating, but not excessively (1.2.1 (e))

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Oil leak, but not excessive (8.4.1 (a) (i))

Brake lever has insufficient reserve travel (1.1.2 (a))

Engine MIL inoperative or indicates a malfunction (8.2.2.2 (g))

Nearside Front Coil spring fractured or broken (5.3.1 (b) (i))

Nearside Windscreen washer jets misaligned and not providing sufficient fluid to the windscreen (3.5 (a))

Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Offside Front Upper Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Rear Exhaust system insecure (6.1.2 (a))

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Oil leak, but not excessive (8.4.1 (a) (i))

Front Inner Brake disc worn, pitted or scored, but not seriously weakened both (1.1.14 (a) (ii))

Front Inner Brake pad(s) wearing thin both (1.1.13 (a) (ii))

Front Lower Suspension arm pin or bush worn but not resulting in excessive movement both (5.3.4 (a) (i))

Offside Rear Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))

Rear Lower Exhaust mounting defective (6.1.2 (a))

Rear Lower exhaust corroded

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Service brake binding but not excessively (1.2.1 (f))

hand brake need slight adjustment

Central Rear Exhaust system insecure (6.1.2 (a))

Offside Rear Service brake excessively binding (1.2.1 (f))

Nearside Front Headlamp aim too low (4.1.2 (a))

Nearside Front Anti-roll bar has excessive play in a ball joint (2.4.G.2)