MOT Status
ExpiredMileage
134,059 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting BOTH n/s and o/s sills have multiple points which need welding (6.2.2 (d) (i))
Power steering component leaking Steering rack (2.1.5 (a))
Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Nearside Front Anti-roll bar linkage ball joint likely to become detached (5.3.4 (a) (ii)) DANGEROUS
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front Tyre worn close to legal limit/worn on edge front tyre tread worn very low (5.2.3 (e))
Nearside Suspension component mounting prescribed area is corroded but not considered excessive inner sills corroded (5.3.6 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge tyre tread worn very low on edges (5.2.3 (e))
Offside Rear Tyre worn close to legal limit/worn on edge tyre tread worn low (5.2.3 (e))
Offside Suspension component mounting prescribed area is corroded but not considered excessive inner sills corroded (5.3.6 (a) (i))
Nearside Rear Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))
Nearside Rear Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))
Nearside Rear Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i))
Offside Rear Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i))
Offside Rear Track rod end ball joint has excessive play (2.1.3 (b) (i))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Fuel Pipe/s corroded ()
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
front and rear suspension corroded
Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))
Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))
Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Fuel Pipe/s corroded ()
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
front and rear suspension corroded
Fuel Pipe/s corroded ()
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Headlamp lens slightly defective (4.1.1 (b) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Headlamp lens slightly defective (4.1.1 (b) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
Towbar slightly corroded within 30cm of towbar mounting (6.1.6 (i) (i))
exhaust deteriorated
surface corrosion to front and rear brake ferrels
Fuel Pipe/s corroded ()
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Headlamp deteriorated but light output not reduced (1.7.5a)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Tie bar/rod corroded but not seriously weakened (2.4.G.1)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Suspension arm corroded but not seriously weakened (2.4.G.1)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Headlamp deteriorated but light output not reduced (1.7.5a)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Tie bar/rod corroded but not seriously weakened (2.4.G.1)
Rear Anti-roll bar corroded but not seriously weakened (2.4.G.1)
Towbar component slightly corroded (6.6.1)
exhaust deteriorated
Front Brake pad(s) wearing thin (3.5.1g)
Fuel Pipe/s corroded ()
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Suspension arm corroded but not seriously weakened (2.4.G.1)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension arm corroded but not seriously weakened (2.4.G.1)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Brake pad(s) wearing thin (3.5.1g)
Rear Brake pipe slightly corroded (3.6.B.2c)
Towbar component slightly corroded (6.6.1)
exhaust deteriorated
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1) DANGEROUS
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1) DANGEROUS
Front Brake pad(s) wearing thin (3.5.1g)
Fuel Pipe/s corroded ()
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Suspension arm corroded but not seriously weakened (2.4.G.1)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension arm corroded but not seriously weakened (2.4.G.1)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Brake pad(s) wearing thin (3.5.1g)
Rear Brake pipe slightly corroded (3.6.B.2c)
Towbar component slightly corroded (6.6.1)
exhaust deteriorated
Front Anti-roll bar corroded but not seriously weakened (2.4.G.1)
Front Brake pad(s) wearing thin (3.5.1g)
Front Brake pipe slightly corroded (3.6.B.2c)
Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Headlamp deteriorated but light output not reduced (1.7.5a)
Offside Headlamp deteriorated but light output not reduced (1.7.5a)
Rear Anti-roll bar corroded but not seriously weakened (2.4.G.1)
Rear Brake pad(s) wearing thin (3.5.1g)
Rear Brake pipe slightly corroded (3.6.B.2c)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear registration plate faded but not likely to be misread (6.3.1d)
Towbar component slightly corroded (6.6.1)
Front Brake pad(s) wearing thin (3.5.1g)
Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Headlamp deteriorated but light output not reduced (1.7.5a)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Headlamp deteriorated but light output not reduced (1.7.5a)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Rear Anti-roll bar corroded but not seriously weakened (2.4.G.1)
Rear Brake pad(s) wearing thin (3.5.1g)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Towbar component slightly corroded (6.6.1)
Front Brake pad(s) wearing thin (3.5.1g)
Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Headlamp deteriorated but light output not reduced (1.7.5a)
Nearside Headlamp not working on dipped beam (1.7.5a)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Headlamp deteriorated but light output not reduced (1.7.5a)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Rear Anti-roll bar corroded but not seriously weakened (2.4.G.1)
Rear Brake pad(s) wearing thin (3.5.1g)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Towbar component slightly corroded (6.6.1)
Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Headlamp deteriorated but light output not reduced (1.7.5a)
Offside Headlamp deteriorated but light output not reduced (1.7.5a)
Rear Brake pipe slightly corroded (3.6.B.2c)
Towbar component slightly corroded (6.6.1)
exhaust in poor condition.
Front Brake pipe slightly corroded (3.6.B.2c)
Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Brake pipe slightly corroded (3.6.B.2c)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Front Brake pipe slightly corroded (3.6.B.2c)
Rear Brake pipe slightly corroded (3.6.B.2c)
How Reliable is the Kia Sorento?
Based on 738,544 MOT tests across 54,549 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
KU53 SVG is a 2003 Kia Sorento in Black with a 2,500cc diesel engine. This vehicle has been through 21 MOT tests with a personal pass rate of 76.2%.
Across all 2003 Kia Sorento models, the average MOT pass rate is 69.2% with a typical mileage of 86,292 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Kia Sorento fails its MOT is brake pipe excessively corroded, accounting for 12,793 recorded failures. If you're considering buying KU53 SVG, it's worth having these areas checked by a mechanic before committing.
The Kia Sorento typically stays on UK roads for around 23 years. At 23 years old, this Kia Sorento is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of KU53 SVG?
You can check the full history of KU53 SVG by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was KU53 SVG registered?
KU53 SVG is a 2003 Kia Sorento, first registered on 22 September 2003.
Is KU53 SVG safe to buy?
The MOT history for KU53 SVG shows 21 tests with a 76.2% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does KU53 SVG have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on KU53 SVG. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.