2006 Mercedes-benz Clk

Oil leak, but not excessive (8.4.1 (a) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Headlamp has a product on the light source so that the light output is severely reduced (4.1.4 (b))

Offside Headlamp has a product on the light source so that the light output is severely reduced (4.1.4 (b))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Front Service brake fluctuating, but not excessively (1.2.1 (e))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Brake pipe corroded, covered in grease or other material all (1.1.11 (c))

Front Registration plate insecure but not likely to fall off (0.1 (a))

Nearside Front Service brake requirements only just met. It would appear that the braking system requires adjustment or repair (1.2.1 (c))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Brake hose slightly deteriorated (1.1.12 (b) (ii))

Offside Front Service brake fluctuating, but not excessively (1.2.1 (e))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Brake hose slightly deteriorated (1.1.12 (b) (ii))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Brake pipe corroded, covered in grease or other material all (1.1.11 (c))

Front Registration plate insecure but not likely to fall off (0.1 (a))

Nearside Front Service brake requirements only just met. It would appear that the braking system requires adjustment or repair (1.2.1 (c))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Brake hose slightly deteriorated (1.1.12 (b) (ii))

Offside Front Service brake fluctuating, but not excessively (1.2.1 (e))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Brake hose slightly deteriorated (1.1.12 (b) (ii))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Nearside Front Windscreen washer provides insufficient washer liquid (3.5 (a))

Nearside Rear Coil spring fractured or broken (5.3.1 (b) (i))

Nearside Rear Road wheel fixing missing (5.2.1 (a) (i))

Offside Rear Coil spring fractured or broken (5.3.1 (b) (i))

Brake hose slightly deteriorated both sides front (1.1.12 (b) (ii))

Brake pipe corroded, covered in grease or other material both sides front & rear (1.1.11 (c))

Front Registration plate insecure but not likely to fall off (0.1 (a))

Headlamp lens slightly defective both sides front projecting a dim beam image (4.1.1 (b) (i))

Nearside Front Anti-roll bar pin or bush worn but not resulting in excessive movement 'D' bush (5.3.4 (a) (i))

Nearside Front Service brake fluctuating, but not excessively (1.2.1 (e))

Nearside Front Windscreen wiper blade defective (3.4 (b) (i))

Suspension arm pin or bush worn but not resulting in excessive movement both sides front (5.3.4 (a) (i))

under trays fitted front to rear

Front Registration plate insecure but not likely to fall off (0.1 (a))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Exhaust mounting defective exhaust hangers corroded (6.1.2 (a))

all 4 brake discs surface corrosion

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

undertrays fitted

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Nearside Rear Brake hose slightly deteriorated (1.1.12 (b) (ii))

Offside Rear Brake hose slightly deteriorated (1.1.12 (b) (ii))

Central Stop lamp(s) not working (4.3.1 (a) (ii))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Windscreen washer not working (3.5 (a))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Nearside Rear Brake hose slightly deteriorated (1.1.12 (b) (ii))

Offside Rear Brake hose slightly deteriorated (1.1.12 (b) (ii))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Lower Suspension arm ball joint excessively worn Rear arm (5.3.4 (a) (i))

Nearside Rear Tyre tread depth below requirements of 1.6mm 245/40R17 (5.2.3 (e)) DANGEROUS

Offside Rear Tyre tread depth below requirements of 1.6mm 245/40R17 (5.2.3 (e)) DANGEROUS

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

BOTH FRONT LOWER ARM (FRONT) BUSHES STARTING TO PERISH

N/S/F TYRE DEVOID OF TREAD ON OUTER EDGE

Child seat fitted not allowing full inspection of adult belt

Nearside Inner Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Outer Front Tyre worn close to the legal limit (4.1.E.1)

n/s/f o/s/f discs worn and pitted

n/s/r o/s/r tyres on limit.

sidewall damage to n/s/r o/s/r tyres.

deep cut in o/s/r tyre wall has been tried to be stuck with glue

engine mill light on