MOT Status
ExpiredMileage
114,378 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))
Nearside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting wheel arch (6.2.2 (d) (i))
Nearside Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer and inner sills (6.2.2 (d) (i))
Offside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))
Offside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting wheel arch (6.2.2 (d) (i))
Offside Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer and inner sills (6.2.2 (d) (i))
Rear Engine mounting bracket damaged or deteriorated resulting in excessive movement (6.1.8 (a) (i))
Windscreen washer not working (3.5 (a))
Nearside Front Floor in such a condition it is likely to cause load insecurity or instability (6.2.4 (a) (ii)) DANGEROUS
Offside Front Floor in such a condition it is likely to cause load insecurity or instability floor (6.2.4 (a) (ii)) DANGEROUS
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Sub-frame mounting modified but not seriously weakened (5.3.3 (c) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Front Inner Road wheel slightly distorted (5.2.2 (c) (i))
Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Front Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security inner sill (6.2.2 (d) (i))
Offside Front Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security inner sill (6.2.2 (d) (i))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Front Integral body structure is corroded but structural rigidity is not significantly reduced Wheel arch (6.1.1 (c) (i))
Nearside Stop lamp(s) not working (4.3.1 (a) (ii))
Offside Stop lamp(s) not working (4.3.1 (a) (ii))
Nearside Front Integral body structure is corroded but structural rigidity is not significantly reduced Wheel arch (6.1.1 (c) (i))
Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))
Offside Stop lamp(s) not working (4.3.1 (a) (ii))
Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Nail in tyre ()
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front tyre wearing on inner edge
Nearside Stop lamp not working (1.2.1b)
Offside Headlamp not working on dipped beam (1.7.5a)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front tyre wearing on inner edge
both rear tyres splitting/cracking
Nearside Headlamp aim too low (1.8)
Nearside Headlamp not working on dipped beam (1.7.5a)
Offside Headlamp aim too low (1.8)
both rear tyres splitting/cracking
handbrake effort low
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
handbrake effort low
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Oil leak
nearside rear tyre cracking
Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
KU58 LRV is a 2008 Ford Ka in Silver with a 1,297cc petrol engine. This vehicle has been through 20 MOT tests with a personal pass rate of 65%.
Across all 2008 Ford Ka models, the average MOT pass rate is 71.0% with a typical mileage of 41,756 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying KU58 LRV, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 18 years old, this Ford Ka is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of KU58 LRV?
You can check the full history of KU58 LRV by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was KU58 LRV registered?
KU58 LRV is a 2008 Ford Ka, first registered on 1 September 2008.
Is KU58 LRV safe to buy?
The MOT history for KU58 LRV shows 20 tests with a 65% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does KU58 LRV have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on KU58 LRV. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.